Tasmin Race car needs parts.......can you help?
Discussion
Following a couple of incidents at Cadwell, yesterday, I could do with some help with getting hold of a few parts quickly if I have any chance of getting back on track at Rockingham in two weeks time.
I need:-
1. Both near and off side alloy hub carriers
2. Front near side front suspension tie rod (control arm). This attaches to the hub then goes backwards and fixes to the chassis unlike the later ones that go forwards.
3. Off side rear light cover.
Will get the car on ramps later and have a closer look to see if anything else is needed.
Thanks for any help you can give me.
Dave
I need:-
1. Both near and off side alloy hub carriers
2. Front near side front suspension tie rod (control arm). This attaches to the hub then goes backwards and fixes to the chassis unlike the later ones that go forwards.
3. Off side rear light cover.
Will get the car on ramps later and have a closer look to see if anything else is needed.
Thanks for any help you can give me.
Dave
Hi Dave, set of rear lights here;
http://cgi.ebay.co.uk/ford-capri-rear-light-units-...
Cant help with the other bits but if you get stuck you can borrow the ones on mine!
Tony
http://cgi.ebay.co.uk/ford-capri-rear-light-units-...
Cant help with the other bits but if you get stuck you can borrow the ones on mine!
Tony
Edited by chedder on Sunday 19th April 12:23
Gassing Station | Wedges | Top of Page | What's New | My Stuff


