Sorry - Another Wheel question (17")
Discussion
I have read through most on the threads on here regarding wheel changes, but cannot seem to find a straight answer to having all 4 wheels the same?
I have read that people have put Ford alloys on their Chims, which i am assuming would be 4 matching alloys? But i cannot see what offsets or rim sizes would be viable.
I understand that the fronts have et25 and rears et35, and i have a non power steered car with 205 and 225 width tyres on the standard wheels.
So, my question is . . .
Are there a set of wheels you can buy that will fit straight on (4 matching) that will house a 205/225 or 215/225 tyre combo, in 17" guise? Or is it a case of having to go to shops and get 2 pairs of wheels in different specs and do it that way. Also is there a common offset that can be used front/rear that will not affect the handling of the car (will a few mm here or there make any difference?)
Sorry if these are stupid questions i was just wondering as it is a hell of a lot easier to buy sets of 4 wheels than 2 pairs.
Thanks in advance
I have read that people have put Ford alloys on their Chims, which i am assuming would be 4 matching alloys? But i cannot see what offsets or rim sizes would be viable.
I understand that the fronts have et25 and rears et35, and i have a non power steered car with 205 and 225 width tyres on the standard wheels.
So, my question is . . .
Are there a set of wheels you can buy that will fit straight on (4 matching) that will house a 205/225 or 215/225 tyre combo, in 17" guise? Or is it a case of having to go to shops and get 2 pairs of wheels in different specs and do it that way. Also is there a common offset that can be used front/rear that will not affect the handling of the car (will a few mm here or there make any difference?)
Sorry if these are stupid questions i was just wondering as it is a hell of a lot easier to buy sets of 4 wheels than 2 pairs.
Thanks in advance
It can 'seem' complicated but it's not all bad. On saying that I'm sure someone will come along and correct me but please forgive, just trying to help.
I switched myself and tied myself up in knots about it, but, I went from standard wheels to FORD 17" 7.5 wide with offset at et 35 fitted with 215/40 fronts and 245/45 rears to keep rolling radius as close to standard for gearing/speedo etc. There is a calculator knocking about somewhere on here that I used and it told myself [and others with same choice of wheel] that it left the outer rims of the new wheels 4mm in on front and 2mm in at rear from standard. No problems with the drive. [was told at the time by a couple of well respected folk on here that know a lot more than me that it's nothing to worry about] Since then I've used hubcentric spacers of 10mm on front and 8mm on rear to accomodate brake upgrade [because of wheels chosen that I didn't want to change] again, no clearance problems.
Hope this helps in some way. [Biggest worry nowadays is posting on here!]
PS; I do have adjustable aftermarket shocks fitted but they are set at standard ride height.
PPS; TVR fitted 16" wheels all round on the last 100 Griff' LE's. Couldn't see them having just 100 pairs of 16" wheels made at different offset.
I switched myself and tied myself up in knots about it, but, I went from standard wheels to FORD 17" 7.5 wide with offset at et 35 fitted with 215/40 fronts and 245/45 rears to keep rolling radius as close to standard for gearing/speedo etc. There is a calculator knocking about somewhere on here that I used and it told myself [and others with same choice of wheel] that it left the outer rims of the new wheels 4mm in on front and 2mm in at rear from standard. No problems with the drive. [was told at the time by a couple of well respected folk on here that know a lot more than me that it's nothing to worry about] Since then I've used hubcentric spacers of 10mm on front and 8mm on rear to accomodate brake upgrade [because of wheels chosen that I didn't want to change] again, no clearance problems.
Hope this helps in some way. [Biggest worry nowadays is posting on here!]
PS; I do have adjustable aftermarket shocks fitted but they are set at standard ride height.
Edited by macdeb on Sunday 19th April 19:00
PPS; TVR fitted 16" wheels all round on the last 100 Griff' LE's. Couldn't see them having just 100 pairs of 16" wheels made at different offset.
Edited by macdeb on Sunday 19th April 19:10
daz the plumber said:
hi , if your going for 17" all round
front 215/40/17
rear 245/40/17
that is the closest combination
front wheel 4x108 et 25 7 or 7.5 j
rear wheel 4x108 et 30 to 35 8j
i got pro race 1.2 from demon tweaks £700 all in .with tyres .felkon 452`s

Nice wheels, 'cept they've 5-holes instead of 4 ???front 215/40/17
rear 245/40/17
that is the closest combination
front wheel 4x108 et 25 7 or 7.5 j
rear wheel 4x108 et 30 to 35 8j
i got pro race 1.2 from demon tweaks £700 all in .with tyres .felkon 452`s


i would measure from the triangle steel plate behind the front wheel and in front of the rears .i would measure and cut some tube, the tape meausure is not good enough. i don`t think there is a specific height some people say go for 6 1/2 rear 5 1/2 front but i go for 150 rear 140 front .i would go for a drive then re adjust.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


