Baffled sump?
Baffled sump?
Author
Discussion

Gusbang

Original Poster:

199 posts

226 months

Sunday 19th April 2009
quotequote all
Anyone know where i can get a baffled sump from? Had a look round on internet and cannot find one.

Mr Haribo

318 posts

220 months

Sunday 19th April 2009
quotequote all
John Eales ?? im not sure of the spelling, im sure about £300 ish !

hiltonig

3,153 posts

239 months

Sunday 19th April 2009
quotequote all
real steel do a kit to make one

loud430

550 posts

214 months

Sunday 19th April 2009
quotequote all
im not sure if they do one but v8 developments might be worth a try?

Gusbang

Original Poster:

199 posts

226 months

Sunday 19th April 2009
quotequote all
Thanks for the replys, found the following :-

John Eales = £345 for a baffled sump
Real Steel = £115 for a DIY kit

Guess it will be a DIY job then.

GreenV8S

31,027 posts

315 months

Sunday 19th April 2009
quotequote all
There are various different designs so when you're comparing prices make sure you understand what you're getting. The best ones have flap valves around the pickup rather than just fixed baffles.

shpub

8,507 posts

303 months

Monday 20th April 2009
quotequote all
Not only that... ever tried welding inside a used sump? The metal absorbs oil which causes a real problem with welding.

rev-erend

21,624 posts

315 months

Monday 20th April 2009
quotequote all
Gusbang said:
Thanks for the replys, found the following :-

John Eales = £345 for a baffled sump
Real Steel = £115 for a DIY kit

Guess it will be a DIY job then.
I would avoid the Real Steel one if I were you .. I mistakenly bought one .. expecting just some plates to weld in .. and what it actually is a big wing sump .. so will give a far great oil capacity ..

I'd go for the JE exchange item. Much easier.

spend

12,581 posts

282 months

Monday 20th April 2009
quotequote all
You should also consider oil accumulators (eg accusumps) if spending that much. Mine cost a lot less than that with integral electric valve.

350Matt

3,915 posts

310 months

Monday 20th April 2009
quotequote all
You can make a pretty effective baffled sump if you weld in a perforated tube that surrounds the oil pickup, The idea is to put the pickup inside a column of oil so you're not so affected by G forces, you need a few holes inte htube to allow oil to still flow in but the baffle otherwise buys you time.

Gusbang

Original Poster:

199 posts

226 months

Monday 20th April 2009
quotequote all
Thanks very much for the comments, will look into this one a bit further.