N/S bonnet catch.
Discussion
Thought about it for the same reason, but then read a thread that said that fitting a small 'chin' spoiler under the front of the car has the same effect - calming down the tendency to flat at speed...
I cut a section of gutter(about 2/5 of the semi-circular profile), shaped the ends, then fitted this right underneath the nose of the car (self-tappers and a bit of silicone, with the 'inside' of the guttering facing down/backwards), below the radiator, and hey presto - no more bonnet flapping so far!!!
In my view, much easier than a second latch for the bonnet.
Giles
I cut a section of gutter(about 2/5 of the semi-circular profile), shaped the ends, then fitted this right underneath the nose of the car (self-tappers and a bit of silicone, with the 'inside' of the guttering facing down/backwards), below the radiator, and hey presto - no more bonnet flapping so far!!!
In my view, much easier than a second latch for the bonnet.
Giles
Thought about it for the same reason, but then read a thread that said that fitting a small 'chin' spoiler under the front of the car has the same effect - calming down the tendency to flat at speed...
I cut a section of gutter(about 2/5 of the semi-circular profile), shaped the ends, then fitted this right underneath the nose of the car (self-tappers and a bit of silicone, with the 'inside' of the guttering facing down/backwards), below the radiator, and hey presto - no more bonnet flapping so far!!!
In my view, much easier than a second latch for the bonnet.
Giles
I cut a section of gutter(about 2/5 of the semi-circular profile), shaped the ends, then fitted this right underneath the nose of the car (self-tappers and a bit of silicone, with the 'inside' of the guttering facing down/backwards), below the radiator, and hey presto - no more bonnet flapping so far!!!
In my view, much easier than a second latch for the bonnet.
Giles
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


