Steve Heath extra long bonnet stay
Discussion
Pretty good 
I was talking to Yan (who helped design it) and he said they would be on the site soon, so i have beenkeeping an eye on there so i could nab one. I think they have only been up for a week or so.
As for the bushes, they are all out now (including the ones in the rear hubs), and all 4 corners of the chassis have been cleaned. Yesterday i also rubbed down, rust treated and painted all of the hubs, so now i am ready fo re-assembly. The wishbones and ARB's are at the powdercoaters as we speak, and should be finished today or tomorrow, and Steves delivery (new bushes and droplinks) should be here today.
With any luck she should be back together by the end of this week. I'm gutted that i keep missing all of the runs
I will keep the tools i used for when you come to do yours Jon, incase they will be of any use to you. I think they should be able to stand up to doing another car
ETA i will get the dimensions of the punch and bits i used to remove the bushes and get a drawing put on here incase it is of any help to anyone once i'm done

I was talking to Yan (who helped design it) and he said they would be on the site soon, so i have beenkeeping an eye on there so i could nab one. I think they have only been up for a week or so.
As for the bushes, they are all out now (including the ones in the rear hubs), and all 4 corners of the chassis have been cleaned. Yesterday i also rubbed down, rust treated and painted all of the hubs, so now i am ready fo re-assembly. The wishbones and ARB's are at the powdercoaters as we speak, and should be finished today or tomorrow, and Steves delivery (new bushes and droplinks) should be here today.
With any luck she should be back together by the end of this week. I'm gutted that i keep missing all of the runs

I will keep the tools i used for when you come to do yours Jon, incase they will be of any use to you. I think they should be able to stand up to doing another car

ETA i will get the dimensions of the punch and bits i used to remove the bushes and get a drawing put on here incase it is of any help to anyone once i'm done
Edited by lewis_sharman on Tuesday 21st April 10:08
Lewis,
Glad you were impressed, I think it is well worth it and saves you potentially from tearing the bonnet hinges out if you use a length of wood that is too long.
I have just replaced my rad and it was so much easier with the new extra length stay even for someoen of a 'strong man' build
there was plenty of access.
Glad yours is coming on, my plenum and rockers are at the powder coaters too, I am going black with polished fins on all of it.
Glad you were impressed, I think it is well worth it and saves you potentially from tearing the bonnet hinges out if you use a length of wood that is too long.
I have just replaced my rad and it was so much easier with the new extra length stay even for someoen of a 'strong man' build
there was plenty of access.Glad yours is coming on, my plenum and rockers are at the powder coaters too, I am going black with polished fins on all of it.
Mr Nordic said:
Lewis,
Glad you were impressed, I think it is well worth it and saves you potentially from tearing the bonnet hinges out if you use a length of wood that is too long.
I have just replaced my rad and it was so much easier with the new extra length stay even for someoen of a 'strong man' build
there was plenty of access.
Glad yours is coming on, my plenum and rockers are at the powder coaters too, I am going black with polished fins on all of it.
Should look very smart Glad you were impressed, I think it is well worth it and saves you potentially from tearing the bonnet hinges out if you use a length of wood that is too long.
I have just replaced my rad and it was so much easier with the new extra length stay even for someoen of a 'strong man' build
there was plenty of access.Glad yours is coming on, my plenum and rockers are at the powder coaters too, I am going black with polished fins on all of it.
Yes the new stay definately improves access to the front of the engine bay by quite a margin!
Next up for me is to get the radiator out and repaired, and while i am at it change to silicon hoses, brake upgrade, new wheels, roll bar, seats, and a few other bits and bobs
looks like i should be getting some overtime in at work then 
Not sure on wheels yet, 17" definately and probably a 6 spoke design of some sort.
As for seats, i am seriously tempted by the fibreglass seats from Triton Race Products, since i will start doing track days soon and i get thrown about enough on the road with the originals in, and i want to put in a roll bar and harness. The Triton seats also get very good reviews from the kitcar community, and are apparently a lot more comfortable than they look.
ETA:
http://www.tritonraceproducts.co.uk/
I have emailed them and asked their advice, they have recommended me the low side seat, and they have designed them so that they do not require any bulkhead support, so seem perfect for the application
As for seats, i am seriously tempted by the fibreglass seats from Triton Race Products, since i will start doing track days soon and i get thrown about enough on the road with the originals in, and i want to put in a roll bar and harness. The Triton seats also get very good reviews from the kitcar community, and are apparently a lot more comfortable than they look.
ETA:
http://www.tritonraceproducts.co.uk/
I have emailed them and asked their advice, they have recommended me the low side seat, and they have designed them so that they do not require any bulkhead support, so seem perfect for the application
Edited by lewis_sharman on Wednesday 22 April 00:23
Gassing Station | Chimaera | Top of Page | What's New | My Stuff





