Done clutch slave,Done brake master.Know clutch masters gone
Done clutch slave,Done brake master.Know clutch masters gone
Author
Discussion

duntus

Original Poster:

329 posts

247 months

Friday 24th April 2009
quotequote all
Clutch master gone i think ,got wet of fluid a little,and when you press clutch pedal it creakes ,makes a funny noise.Must be this i think.Not having a lot of luck with this one so far.Any one had this problem.?

GreenV8S

31,014 posts

313 months

Friday 24th April 2009
quotequote all
Creaking noises are not likely to be anything to do with hydraulics and just the mechanical linkage needing a dab of grease.

If you've already repaired/replaced the brake master then it's possible that you have still got brake fluid lying around from that; check whether the clutch fluid level is going down to see whether you have a leak, and if so check for a leak at the slave end, and the pipe to it, as well as the master.

duntus

Original Poster:

329 posts

247 months

Friday 24th April 2009
quotequote all
GreenV8S said:
Creaking noises are not likely to be anything to do with hydraulics and just the mechanical linkage needing a dab of grease.

If you've already repaired/replaced the brake master then it's possible that you have still got brake fluid lying around from that; check whether the clutch fluid level is going down to see whether you have a leak, and if so check for a leak at the slave end, and the pipe to it, as well as the master.
seems a bit wet on the spidle from the clutch master

PetrolHeadPete

791 posts

218 months

Friday 24th April 2009
quotequote all
mine was wet on spindle too so replaced it
clutch seems a little easier now...less notchy