My Chim. Wont Start.... Help.... The Sun Is Out....
My Chim. Wont Start.... Help.... The Sun Is Out....
Author
Discussion

dooley1414

Original Poster:

15 posts

244 months

Sunday 26th April 2009
quotequote all
Hi.... Please could someone help me.... went to start my Chim. this morning.... and she will not fire up?

Symptoms are as follow....

1. Once you turn on the ignition.... usually you hear the Petrol Pump Prime it's self.... But Nothing now.

2. There is no power to the wipers, or washers, internal fan, and the Boot Button release does not work.

3. Checked all internal fuses and Postitive Battery Termanal BIG MAIN FUSE.

4. Car actually turns over fine but no Firing.

If there is anyone with some clues???? Please HELP.... the SUN is finally here....

Many Thanks In Advance

Des.


grumbledoak

32,571 posts

264 months

Sunday 26th April 2009
quotequote all
Normally the battery, if you've left them for a while. Do you get a clicking noise when you try to turn her over?

scotty_d

6,795 posts

225 months

Sunday 26th April 2009
quotequote all
If the battery has power could either be fuel pump relay or the immobiliser by the sounds of things

dooley1414

Original Poster:

15 posts

244 months

Monday 27th April 2009
quotequote all
Normally the battery, if you've left them for a while. Do you get a clicking noise when you try to turn her over?


No clicking.... It just Turns over fine but no firing????

dooley1414

Original Poster:

15 posts

244 months

Monday 27th April 2009
quotequote all
If the battery has power could either be fuel pump relay or the immobiliser by the sounds of things


Thats what I thought it might be.... it has been sitting for a while.... Maybe I'll go down that route.... Thanks....

GJOSDDLO

92 posts

211 months

Monday 27th April 2009
quotequote all
I had a low battery last month, but it still primed, turned over but wouldn't start

I think it could be a either (or a combination of) Fuel pump & battery related...

Connect a battery boost (if you don't have one, the AA usually do) up & see if it works?

Good luck, Let us know how you get on.

Godwin


pinchmeimdreamin

10,918 posts

249 months

Monday 27th April 2009
quotequote all
If its turning over fine but not firing i would think petrol pump relay, however with other electrics not working do they run on a common fuse?


dooley1414

Original Poster:

15 posts

244 months

Tuesday 28th April 2009
quotequote all
GJOSDDLO said:
I had a low battery last month, but it still primed, turned over but wouldn't start

I think it could be a either (or a combination of) Fuel pump & battery related...

Connect a battery boost (if you don't have one, the AA usually do) up & see if it works?

Good luck, Let us know how you get on.

Godwin

Hi.... thanks for IDEAS.... I have a Battery Booster.... and have tried it off there too.... but still no Joy????

Cheers.... Des.

Tvrjock

350 posts

223 months

Tuesday 28th April 2009
quotequote all
Just a thought but have you checked your inertia switch, it is located above the handbook pouch under the passengers side dash remove the 2 screws and it will flap down the switch is in this area, it has 3 wires going in from memorie there is a yellow/yellow and black/ black and there is a small button on the side try pushin this in and see if that helps.
Graeme

Karussell

157 posts

275 months

Tuesday 28th April 2009
quotequote all
Hi there,

I have had a similar problem, where the car cuts out, and will spin over but will not fire.
I do have the fuel pump priming whirr and the lights on the dash. Engine spins over, but no sign of a spark.That is until the car is left to stand for a period of time, then it fires up immediately

I have replaced the coil and ignition module, both from TVR Power, and it seems to have solved the issue

I have spoken with Carl Baker (Top man that he is) and he advises me that the immobiliser will either fail, or work. It will not disarm certain areas of thye circuits that it protects.

For the sake of about £60, well worth going down this route. That is assuming that you have no spark!. Pull out the king lead from the di9zzy, and see if it arcs against the engine

K


dooley1414

Original Poster:

15 posts

244 months

Tuesday 28th April 2009
quotequote all
Tvrjock said:
Just a thought but have you checked your inertia switch, it is located above the handbook pouch under the passengers side dash remove the 2 screws and it will flap down the switch is in this area, it has 3 wires going in from memorie there is a yellow/yellow and black/ black and there is a small button on the side try pushin this in and see if that helps.
Graeme
Cheers Graeme.... I thought your idea was going to work.... but No.... not on this ocation.... Thank you anyway.... Anymore ideas.... are definatley welcome.... Cheers.... Des.

teamrecon

154 posts

220 months

Tuesday 28th April 2009
quotequote all
"I have had a similar problem, where the car cuts out, and will spin over but will not fire.
I do have the fuel pump priming whirr and the lights on the dash. Engine spins over, but no sign of a spark.That is until the car is left to stand for a period of time, then it fires up immediately
"



Just a thought here.

My Chim was doing exactly this after a winter layup. Turning over but not firing. Had it recovered to a local indie, who did an oil and filter change. After this, it apparently came back to life one cylinder at a time, and has been fine ever since.

I'm not sure if this was just a tale, but I only paid for the oil & filter change, so I'm not complaining !!! beer

Neil

Edited by teamrecon on Tuesday 28th April 14:30

paulathome

686 posts

249 months

Tuesday 28th April 2009
quotequote all
Shirley if the engines turning over the battery is probably OK, but you say you have no wipers or heater fan running which would suggest a fault with the ignition switch if you have no blown fuses.
The immobiliser only breaks the ignition to the engine not the whole car.
I would check you have a live feed to the ignition switch when it's turned off. Then check you have a live feed coming off the ignition switch ie engine side when turned on.
There's no way its going to start if no power is arriving or leaving the ignition switch.
Cheers.
Paul.