Rear hubs,confrimation needed,please.
Discussion
Can anyone please confirm if the rear hubs are different from solid rear disc to later vented rear,as i am upgrading mine to the later seeing as i have Cosworth fronts
thanks in advance,it will save me removing the wheels on my brothers car to have a measure up,obviously i know the disc are 20mm bigger but need to know weather ford pushed the caliper further out with the caliper carriers or the hub bolt spacings.
thanks in advance,it will save me removing the wheels on my brothers car to have a measure up,obviously i know the disc are 20mm bigger but need to know weather ford pushed the caliper further out with the caliper carriers or the hub bolt spacings.If no-one can confirm I'd speak to a brake supplier - someone like http://www.brakeparts.co.uk - I've used these for a few parts and have spoken to a guy there called Mitch who was very helpful.
Their website is also useful - you can look up various models parts (Ford) to compare part numbers.
Their website is also useful - you can look up various models parts (Ford) to compare part numbers.
AntonyJ said:
The hubs are the same, but the bearing carriers are different,as they provide the position of the caliper relevant to the disc.
I suspected the calipers are not moved out by just the carriers
i will have to look out for a couple of bearing carriers then,i have just bagged two NOS ford calipers from a cossie Sierra/Granada for vented discs so i will have a hunt around,one of my handbrake mechanisms is lazy and could not see the point of just staying with the solids and getting new/recon calipers,thank you very much chaps much appreciated 
SMB said:
AntonyJ said:
The hubs are the same, but the bearing carriers are different,as they provide the position of the caliper relevant to the disc.
The Uprights are also different so you will have to source from a later car.I have 500 spec brakes fitted to my '92 car on original uprights.
Edited by AntonyJ on Tuesday 28th April 19:39
AntonyJ said:
SMB said:
AntonyJ said:
The hubs are the same, but the bearing carriers are different,as they provide the position of the caliper relevant to the disc.
The Uprights are also different so you will have to source from a later car.I have 500 spec brakes fitted to my '92 car on original uprights.
Edited by AntonyJ on Tuesday 28th April 19:39
its just the bearing carriers i need have checked now Edited by Simon Says on Wednesday 29th April 10:12
AntonyJ said:
SMB said:
AntonyJ said:
The hubs are the same, but the bearing carriers are different,as they provide the position of the caliper relevant to the disc.
The Uprights are also different so you will have to source from a later car.I have 500 spec brakes fitted to my '92 car on original uprights.
Edited by AntonyJ on Tuesday 28th April 19:39
I've just done this on my Griff 4.0, gone from 253 solid to 273 vented. On my car it required:
New bearing carriers - I think you just need a later 2wd Cossie or a Mondeo V6, I found an "RS breaker" and told him I wanted 273mm disc compatible bearing carriers. There's someone selling brand new calipers suitable for vented discs on ebay for £110 or thereabouts, and 273mm vented discs you can get anywhere.
So I strongly suspect just a bearing carrier change on your car too.
Neil
New bearing carriers - I think you just need a later 2wd Cossie or a Mondeo V6, I found an "RS breaker" and told him I wanted 273mm disc compatible bearing carriers. There's someone selling brand new calipers suitable for vented discs on ebay for £110 or thereabouts, and 273mm vented discs you can get anywhere.
So I strongly suspect just a bearing carrier change on your car too.
Neil
kabaman said:
I've just done this on my Griff 4.0, gone from 253 solid to 273 vented. On my car it required:
New bearing carriers - I think you just need a later 2wd Cossie or a Mondeo V6, I found an "RS breaker" and told him I wanted 273mm disc compatible bearing carriers. There's someone selling brand new calipers suitable for vented discs on ebay for £110 or thereabouts, and 273mm vented discs you can get anywhere.
So I strongly suspect just a bearing carrier change on your car too.
Neil
Yep,i got those calipers new too,what RS breaker please Kabaman? thanks.New bearing carriers - I think you just need a later 2wd Cossie or a Mondeo V6, I found an "RS breaker" and told him I wanted 273mm disc compatible bearing carriers. There's someone selling brand new calipers suitable for vented discs on ebay for £110 or thereabouts, and 273mm vented discs you can get anywhere.
So I strongly suspect just a bearing carrier change on your car too.
Neil
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




