Next job on the list, oil hoses.
Discussion
Yep while checking mine over after start up from winter lay-up.
Found the hose out of the oil filter that goes off the to the cooler was leaking. Checked the unions and applied some sealant.
Before reassembly I noticed that the inner pipe of the swaged fitting moved!
Checked the other pipes and all of the swaged joints have signs of oil around them!
Found the hose out of the oil filter that goes off the to the cooler was leaking. Checked the unions and applied some sealant.
Before reassembly I noticed that the inner pipe of the swaged fitting moved!
Checked the other pipes and all of the swaged joints have signs of oil around them!
Hi Matt, you may find that the oil hose from filter housing to oil cooler is no longer available off the self. Str8 6 tried to find one for me as its started to crack but i was told the only option is to take it out and get a new one made at pirtek.
if you do manage to find one pls drop me a line.
thanks
kostas
if you do manage to find one pls drop me a line.
thanks
kostas
Edited by QuiteQuietCerb on Tuesday 28th April 21:33
QuiteQuietCerb said:
Hi Matt, you may find that the oil hose from filter housing to oil cooler is no longer available off the self. Str8 6 tried to find one for me as its started to crack but i was told the only option is to take it out and get a new one made at pirtek.
if you do manage to find one pls drop me a line.
thanks
kostas
tbh I'd get them made up anyway. I don't trust anything that was built to TVR's specs. if you do manage to find one pls drop me a line.
thanks
kostas
Edited by QuiteQuietCerb on Tuesday 28th April 21:33

It's normally cheaper too.
I got a full set of hoses from these guys hosemaker.co.uk
All 3 hoses in 3 days for less than £50 seemed a good deal.
Alan
All 3 hoses in 3 days for less than £50 seemed a good deal.
Alan
Edited by little Al on Tuesday 28th April 22:41
ridds said:
Yep while checking mine over after start up from winter lay-up.
Found the hose out of the oil filter that goes off the to the cooler was leaking. Checked the unions and applied some sealant.
Before reassembly I noticed that the inner pipe of the swaged fitting moved!
Checked the other pipes and all of the swaged joints have signs of oil around them!
slightly off the subject but on the subject of hoses...Found the hose out of the oil filter that goes off the to the cooler was leaking. Checked the unions and applied some sealant.
Before reassembly I noticed that the inner pipe of the swaged fitting moved!
Checked the other pipes and all of the swaged joints have signs of oil around them!
in the process of replacing the water hoses on my 98 4.2 with some nice blue ones from tim @ ACT (thanks tim)...anyway, the ones that came off! They looked OK on the car (ie - visually) but they werent...they crumbled once off the car. Might be worth checking the water hoses while you are on...especially if you have some long trips planned.
ridds said:
I will do eventually. Are you in a hurry for it?
I've only just got mine back together and was hoping to drive it for a while before taking it apart again.
Hi Matt,I've only just got mine back together and was hoping to drive it for a while before taking it apart again.

Measure the hoses and go down your local Pirtek depot on a Sat morning and take some cash
. They had the correct type of hose on the shelf and all the fittings, I got them to make me hoses up to plumb in the oil cooler too.Rich.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff




