Chimaera oil pressure sender

[pinchmeimdreamin]

Well thought i would do one last job before the weekend and check the oil pickup pipe was clear and put new gasket on the sump,all was going well until i managed to slip with a spanner and snapped the connector off the oil pressure sender

So I need a new sender I have tried searching on here but cannot find the part number or anything i would rather not pay £60ish for a tvr part when i can probably get a rover part for alot less

So does anyone know the part number or which LR/RR its off.

97 Chim 400

Any help very much appreciated as I want her back on the road for the weekend guys its going to be sunny

[Mick G Star]

pinchmeimdreamin said:

Well thought i would do one last job before the weekend and check the oil pickup pipe was clear and put new gasket on the sump,all was going well until i managed to slip with a spanner and snapped the connector off the oil pressure sender

So I need a new sender I have tried searching on here but cannot find the part number or anything i would rather not pay £60ish for a tvr part when i can probably get a rover part for alot less

So does anyone know the part number or which LR/RR its off.

97 Chim 400

Any help very much appreciated as I want her back on the road for the weekend guys its going to be sunny

We always have a spare with us and we will be at Rockingham Friday afternoon/teatime, the unit is s/hand but working and not leaking. Its yours for £20 if it gets you back on the road and your willing to pick it up from Rock. You can contact us on 07947 642230.

Edited by Mick G Star on Thursday 30th April 22:22

[walt762]

Be careful if you are buying a LR part because I believe the senders are calibrated to the type of Gauge you have in the car which is normally caerbont but there are others.
I just bit the bullet & bought one from clever trevor to save any hassle.