Headlamp adjustment
Discussion
Hi folks
I have been looking at PH from time to time and finally decided to come on board. This has been partly prompted by our TVR Chimaera failing it's MOT on Headlamp alignment.
It's a '95 400 model. Can anyone tell me how to adjust these? It's been laid up for the last 18 months, and I finally persuaded my wife that we should get it out (It is her car). After 18 months in a barn, headlamp alignment only on the MOT was'nt too bad.
I have been looking at PH from time to time and finally decided to come on board. This has been partly prompted by our TVR Chimaera failing it's MOT on Headlamp alignment.

It's a '95 400 model. Can anyone tell me how to adjust these? It's been laid up for the last 18 months, and I finally persuaded my wife that we should get it out (It is her car). After 18 months in a barn, headlamp alignment only on the MOT was'nt too bad.

ace01 said:
Hi folks
I have been looking at PH from time to time and finally decided to come on board. This has been partly prompted by our TVR Chimaera failing it's MOT on Headlamp alignment.
It's a '95 400 model. Can anyone tell me how to adjust these? It's been laid up for the last 18 months, and I finally persuaded my wife that we should get it out (It is her car). After 18 months in a barn, headlamp alignment only on the MOT was'nt too bad.
The adjusters are hidden behind the headlamp cowls and a smear of mastic. Might be just the excuse you need to do the Lupo headlight conversion. I have been looking at PH from time to time and finally decided to come on board. This has been partly prompted by our TVR Chimaera failing it's MOT on Headlamp alignment.

It's a '95 400 model. Can anyone tell me how to adjust these? It's been laid up for the last 18 months, and I finally persuaded my wife that we should get it out (It is her car). After 18 months in a barn, headlamp alignment only on the MOT was'nt too bad.

Thanks for that. Lupo conversion? I might have to search for that. The lights are pretty good at the moment, I think they may have had a conversion fitted. But more light is good.;)
It's amazing, the Chim has been parked up for the last year to 18 months and now I'm getting hassled by her in doors to sort it out quick.
Thanks again.
It's amazing, the Chim has been parked up for the last year to 18 months and now I'm getting hassled by her in doors to sort it out quick.

Thanks again.
ace01 said:
Thanks for that. Lupo conversion? I might have to search for that. The lights are pretty good at the moment, I think they may have had a conversion fitted. But more light is good.;)
It's amazing, the Chim has been parked up for the last year to 18 months and now I'm getting hassled by her in doors to sort it out quick.
Thanks again.
The good weather is coming and she wants the wind in her hair - which hair is another matter It's amazing, the Chim has been parked up for the last year to 18 months and now I'm getting hassled by her in doors to sort it out quick.

Thanks again.

If you have a copy of the bible its covered in there.
I noticed that there is also a headlight adjustment kit available for less than a tenner. It wouldn't reduce the work on this occasion but if you've got to remove the headlight shrouds anyway then you might as well put in the kit at least.
The cost for parts for the Lupo conversion looks to be about £100 but the work is quite extensive and involved although it would appear well within the scope of a com[petent and confident DIY'er with an ability to engineer (bodge) solutions.
Edited by Tyre_Tread on Saturday 2nd May 12:35
Well what a nightmare that was! I removed the cowls, but the adjusters are behind the headlamp and have wingnuts. A real stretch through the grill to get to the outside one and naturally they were rusted solid. I had to remove the mastic and take out the lens and reflector. Then remake some adjusters to replace the old. This time plenty of copper grease went on.;)
Just got to remastic the lens and hope the MOT man can impersonate a vet at calfing time
Just got to remastic the lens and hope the MOT man can impersonate a vet at calfing time

ace01 said:
Well what a nightmare that was! I removed the cowls, but the adjusters are behind the headlamp and have wingnuts. A real stretch through the grill to get to the outside one and naturally they were rusted solid. I had to remove the mastic and take out the lens and reflector. Then remake some adjusters to replace the old. This time plenty of copper grease went on.;)
Just got to remastic the lens and hope the MOT man can impersonate a vet at calfing time
Don't want to pee on your bonfire but generally the MOT tester will not (unless he's a tame one) adjust anything as they can end up getting into all sorts of problems and if they have a fully booked schedule will not want to compromise it.Just got to remastic the lens and hope the MOT man can impersonate a vet at calfing time

Easy enough to get them about right. Have a search for setting headlights.
this depends on the changeover,did mine 6 months ago and what a faff on if youve if got an early chim with the mesh on the front as i have, you can get your hands thru the grill and get to the wing nuts, on the later models you have an access pannel in the inner wheel arch!
Bosch do the reflectors 50 quid not bad but had to wait a week to arrive, also if you have a later model you have to remove the rad to change the airfilter where as with an early one you just take the mesh off and with a little adjustment to the mounting bracket holding the old clynder filter on can easily fit an induction filter.
Bye the way did you get your rubber seal back on? ive given up trying!
Bosch do the reflectors 50 quid not bad but had to wait a week to arrive, also if you have a later model you have to remove the rad to change the airfilter where as with an early one you just take the mesh off and with a little adjustment to the mounting bracket holding the old clynder filter on can easily fit an induction filter.
Bye the way did you get your rubber seal back on? ive given up trying!
jim.2007 said:
.............also if you have a later model you have to remove the rad to change the airfilter where as with an early one you just take the mesh off and with a little adjustment to the mounting bracket holding the old clynder filter on can easily fit an induction filter.
Not sure where you got that idea from 
ace01 said:
I've had a look for headlamp setting and various alternatives, but can't find anything.
Can anybody gives some idea on how to do this?
While we're at it, what's the bible you guys talk about?
http://www.dvtani.gov.uk/uploads/customerservices/Headlampleaflet.pdf
Can anybody gives some idea on how to do this?While we're at it, what's the bible you guys talk about?
http://www.chimaerapages.com/resources_faq.php#bib...
http://www.tvrcc-shop.co.uk/acatalog/TVRCC_Catalog...HistoriesCollectors_Guides_34.html
Well, I feel a little as though I have been hoist by my own petard.
Turned headlights on to drive home last night and one of them was pointing up into the trees. It seems the vertical adjuster had become detached and when I took the cover off under the wing the adjuster was seized solid.
I spent 2 hours trying to bodge a repair from the back but in the end resorted to taking out the lens and have bodged it up.
I need some tiger seal now to put it all back together.
I do fancy the Lupo light conversion though.
Turned headlights on to drive home last night and one of them was pointing up into the trees. It seems the vertical adjuster had become detached and when I took the cover off under the wing the adjuster was seized solid.
I spent 2 hours trying to bodge a repair from the back but in the end resorted to taking out the lens and have bodged it up.
I need some tiger seal now to put it all back together.
I do fancy the Lupo light conversion though.
Cider Andy said:
I've just replaced the reflectors in my car and had a similar problem. Both vertical adjusters were rusted solid and the springs had rusted to nothing.
If you need a spare adjuster (set screw, spring, reflector mounting nut/tag and wingnut), I have one.
That's exactly what I need Andy, just the adjuster. If you need a spare adjuster (set screw, spring, reflector mounting nut/tag and wingnut), I have one.
I was hoping to get the car ready for a run on Saturday to see my wife's old school friends.
I'll bodge it for now.
If you want to set the level. One way of ensuring that your lights aren't pointing up is to park the car infront of a wall (at night ideally) then back away from it. If the beam on the wall goes down, then you know your lights are aimed down, and if the beam goes up, then you know you're pointing up.
The trouble is that, to get to the adjusters, you really need the wheels off, which means the test isn't easy - unless you have access to someone with really slim arms that can reach through the access hole while the wheels are on. Or, maybe you could jack the car up while the wheels are on - to give you enough room to reach through (I haven't tried that myself, but it may be possible).
The trouble is that, to get to the adjusters, you really need the wheels off, which means the test isn't easy - unless you have access to someone with really slim arms that can reach through the access hole while the wheels are on. Or, maybe you could jack the car up while the wheels are on - to give you enough room to reach through (I haven't tried that myself, but it may be possible).
Teetertank said:
If you want to set the level. One way of ensuring that your lights aren't pointing up is to park the car infront of a wall (at night ideally) then back away from it. If the beam on the wall goes down, then you know your lights are aimed down, and if the beam goes up, then you know you're pointing up.
The trouble is that, to get to the adjusters, you really need the wheels off, which means the test isn't easy - unless you have access to someone with really slim arms that can reach through the access hole while the wheels are on. Or, maybe you could jack the car up while the wheels are on - to give you enough room to reach through (I haven't tried that myself, but it may be possible).
Good advice. The trouble is that, to get to the adjusters, you really need the wheels off, which means the test isn't easy - unless you have access to someone with really slim arms that can reach through the access hole while the wheels are on. Or, maybe you could jack the car up while the wheels are on - to give you enough room to reach through (I haven't tried that myself, but it may be possible).
I'll be setting them tomorrow - hopefully.
I've just put the lens back on the nearside after cleaning the reflector and washing the lens - what an amazing difference. The reflector looked OK until I wiped it and it was covered in a thin film of dust.
Cider Andy said:
Tyre_Tread said:
The reflector looked OK until I wiped it and it was covered in a thin film of dust.
Not as bad as mine then?
PM me if you want the adjuster.
Won't you need the adjuster for the other side?
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



