This weekend i will be mostly fitting new carpets and hood
This weekend i will be mostly fitting new carpets and hood
Author
Discussion

Simon Says

Original Poster:

19,466 posts

252 months

Saturday 2nd May 2009
quotequote all
Oh well finely gone for the crunch,cant put it off any longer decided to change my carpets(Coverdale)and full hood replacement(Mike Hammond)removed both seat belt bolts last night before leaving work(got the necessaries there in case i had trouble)the bolts that go into the outriggers(stubborn little buggers)i will post some pics when its finished,cant keep looking for excuses by saying i would rather be driving it especially with weather like we are having at the moment rolleyes the stitching was coming away on the hood anyway and the less said about the carpets the better i have only had the stuff for over 12 months laugh watch this space whistle

Edited by Simon Says on Saturday 2nd May 09:23

Chimjunkie

2,879 posts

242 months

Saturday 2nd May 2009
quotequote all
I wouldn't use standard spray impact adhesive!!! It will come away when it gets hot and the car is left in the sun. Will be ok in most places, but not worth taking the chance. You are best using a high temperature impact adhesive. Good luck. Very rewarding job.

Simon Says

Original Poster:

19,466 posts

252 months

Saturday 2nd May 2009
quotequote all
Chimjunkie said:
I wouldn't use standard spray impact adhesive!!! It will come away when it gets hot and the car is left in the sun. Will be ok in most places, but not worth taking the chance. You are best using a high temperature impact adhesive. Good luck. Very rewarding job.
Thanks Chimjunkie,i couldn't remember who had this problem(it was you)but will be taking your advice,thanks Simon yes

Hut49

3,544 posts

293 months

Saturday 2nd May 2009
quotequote all
Chimjunkie said:
I wouldn't use standard spray impact adhesive!!! It will come away when it gets hot and the car is left in the sun. Will be ok in most places, but not worth taking the chance. You are best using a high temperature impact adhesive. Good luck. Very rewarding job.
Try something like this: http://www.bondrite.co.uk/contact-/-impact/high-te...

Simon Says

Original Poster:

19,466 posts

252 months

Monday 4th May 2009
quotequote all
Well its going Ok,but bloody hell would not want to do another(more a nuts & bolts bod)well what i can say is the Coverdale is real top notch stuff and def recommended kit bow the removing cleaning and prepping is just so time consuming and the less said about how the carpet is jammed under the middle lower dash area the better,i am using a combination of a recommended spray adhesive(4 cans so far)and Evostick Green(could not get the Bondrite in time,but thanks Hut49)my opinion is this if you have a local recommended trimmer who can quote a price your happy with then go for it wink the only reason i did job is because none could turn around in the time i wanted most wanted 48hrs which i was not happy with,the prices i was getting quoted reasonable too,just a heads for anyone contemplating doing this job thumbup oh well,start roof now smile

Edited by Simon Says on Monday 4th May 10:06

T_Pot

2,542 posts

228 months

Monday 4th May 2009
quotequote all
pics so far?

Simon Says

Original Poster:

19,466 posts

252 months

Monday 4th May 2009
quotequote all
T_Pot said:
pics so far?
Not yet wink patience dear boy biggrin

philmccann

430 posts

231 months

Monday 4th May 2009
quotequote all
Am just about to fit new hood. Got it from BAS. Good looking item. What a job removing the old one!!! Had been glued with Evo-Stik but everywhere!!. Even Evo-Stik remover was no use. Had to resort to drill with wire brush and Emery cloth. Took forever to get the hoop and tension arm clean. However. tomorrow's the day to start the refit. Have got some double sided tape as per the D Hammerton (Griff) site and will try that first.Then the impact adhesive.
Not confident, but must be done.

Reason for the job is I bought the car from a family whose father was the owner of the car. He had died. And the car was left to rot. Had been broken into, via the rear screen, and the stereo nicked. (Well it was Manchester!!) However, I have had to rebuild the dashboard is it was literally ripped out, destroying the fibreglass mountings, the walnut dash etc.

Anyway, it had been "repairead", but whoever fitted the new rear window was a complete Tcensoredt, as he got the hood off centre. There was around inch and half too much at one side and obviously the same short at the other side, thereby allowing the rain in. So, have only been able to use it in clement weather so far. Hopefully the new hood will sort all that.

Not really looking forward to this, but needs must. Want it back on the road for the weekend.

Wish me luck

Cheers

Phil

Simon Says

Original Poster:

19,466 posts

252 months

Sunday 17th May 2009
quotequote all
Update of progress,been longer than expected due to me doing all the work at home rather than the workshop(spend long enough at work already)and crap weather to boot i dont have preparation pics for the roof as i did this at work but lets just say to get all the glue off is bloody hard work and time consuming apart from three weatherstrip screws breaking off mad glad idid this part as work as i have the necessary tools for this kind of thing hehe i will post some more organized pics when everything is finished,just like to say Mike Hammond and Coverdale sell top quality kit,well impressed wioth quality of both the roof and my carpet set,would i want to this again in the near future definitely not eekwhistle and those pedals are not long for this world smile



Edited by Simon Says on Monday 18th May 14:07


Edited by Simon Says on Monday 18th May 14:11

SP6 Animal

6,015 posts

241 months

Sunday 17th May 2009
quotequote all

thumbup

Simon Says

Original Poster:

19,466 posts

252 months

Monday 18th May 2009
quotequote all
SP6 Animal said:

thumbup
Smartarse hehe got your car fixed yet traitor biglaugh

SP6 Animal

6,015 posts

241 months

Monday 18th May 2009
quotequote all
Thursday matesmile

Simon Says

Original Poster:

19,466 posts

252 months

Monday 18th May 2009
quotequote all
SP6 Animal said:
Thursday matesmile
Cool wink mail you later thumbup

STEV8E

635 posts

240 months

Monday 18th May 2009
quotequote all
Simon Says said:
got your car fixed yet traitor biglaugh
eek He'll be back hehe

Simon Says

Original Poster:

19,466 posts

252 months

Monday 25th May 2009
quotequote all
Latest update,finally finished(well apart from a couple of screw caps etc etc)and no i would not recommend it frown find yourself analyzing every detail after rolleyes big thanks to my brother Mark for the roof help/details thumbup WARNING:Picture heavy laugh roof now wink the door cards i am undecided on but think i will go the black carbon route here,even though i got extra carpet from Coverdale for this job just think carpet on the doors looks odd scratchchin yes i know the colors odd rolleyes





Edited by Simon Says on Monday 25th May 17:22


Edited by Simon Says on Monday 25th May 21:39


Edited by Simon Says on Tuesday 26th May 22:36


Edited by Simon Says on Tuesday 26th May 22:38

locodude

510 posts

226 months

Monday 25th May 2009
quotequote all
Hood looks great, I'll be doing mine soon-ish. How hard was it, i.e. is it DIY-able. I'm pretty handy with a set of tools but this is a bit outside my skill base.

Simon Says

Original Poster:

19,466 posts

252 months

Monday 25th May 2009
quotequote all
locodude said:
Hood looks great, I'll be doing mine soon-ish. How hard was it, i.e. is it DIY-able. I'm pretty handy with a set of tools but this is a bit outside my skill base.
Patience is the key,and preparation is everything and also the worst bit of the job,removing all that glue was a chore Evo stick remover helped here wink check all the details of how the fabric edges finish front and rear(where the glass weather strip tracks are)and dont panic when you seem to have what seems like air bubbles under the fabric soon as the temperature changed all mind disappeared despite my frantic rubbing laugh yes its time consuming would i like to do another? no def not,i am more a nuts and bolts person than a fabrics one rolleyes just make sure the fabric is centered and where you want it before final rubbing down of the fabric.

SP6 Animal

6,015 posts

241 months

Monday 25th May 2009
quotequote all
Top man well done not something for me i think.thumbup

Simon Says

Original Poster:

19,466 posts

252 months

Monday 25th May 2009
quotequote all
SP6 Animal said:
Top man well done not something for me i think.thumbup
Thanks Paul,cant say i enjoyed doing it either cool just the man YHM thumbup

Simon Says

Original Poster:

19,466 posts

252 months

Monday 25th May 2009
quotequote all
Quinny said:
Simon,

Put some spaces between your pics.

This thread is about 3ft widehehehehe
I know sorry hehe consider it done smile