Found a chimaera I like
Found a chimaera I like
Author
Discussion

Markedman2020

Original Poster:

39 posts

211 months

Sunday 3rd May 2009
quotequote all
Hi guys, I have found a chimaera after seeing about 8 of them. It is a little rusty on the chassis but nothing I think I have to worry about if it is treated now. The exhast is a little rusty too and i think it will eventually need replacing, i'll add a few photos. My main conundrum is do I get it inspected by someone like Rob Ingleby? looks like it will cost between 200 and 300 pounds but I suppose it will be money well spent. just a bit of a gulp if the car turns out to be a dog. Anyway let me know what you think!

Mark

Markedman2020

Original Poster:

39 posts

211 months

Sunday 3rd May 2009
quotequote all


The exhaust

Markedman2020

Original Poster:

39 posts

211 months

Sunday 3rd May 2009
quotequote all

worst bit of outrigger

Markedman2020

Original Poster:

39 posts

211 months

Sunday 3rd May 2009
quotequote all

That is the worst I could see of the chassis

bjarkes

122 posts

215 months

Sunday 3rd May 2009
quotequote all
Uhh those outriggers are tricky...more pictures needed. The problems are especialy on top of them and it can be difficult to spot, try getting your hands around them and feel the if there is and problems and use a screwdriver or something like that.

Bjarke

Markedman2020

Original Poster:

39 posts

211 months

Sunday 3rd May 2009
quotequote all

Has anyone seen these before? they are cut under the main intake in the nose like extra air intakes. Is it a feature of the 450?

Markedman2020

Original Poster:

39 posts

211 months

Sunday 3rd May 2009
quotequote all

This was the top of the previous shot that sits at the rear base of the front wheel arch.

Jasandjules

72,703 posts

260 months

Sunday 3rd May 2009
quotequote all
Is it an absolute bargain? Will the seller negotiate depending on what's wrong with it? IF so, then 2-300 on an inspection could save you thousands....

Markedman2020

Original Poster:

39 posts

211 months

Sunday 3rd May 2009
quotequote all

does this look like something for concern?

lewis_sharman

5,958 posts

222 months

Sunday 3rd May 2009
quotequote all
hmmm scratchchin




I might have to drill three holes like that . . . atm i need some boot drainage hehe

Markedman2020

Original Poster:

39 posts

211 months

Sunday 3rd May 2009
quotequote all
Since I'm not identifying the car and the advert was actually in auto trader, I hope I'm not breaking any rules! I have got him down to £8750 but that is pretty much all my budget. It needs new rears but body is perfect and the hood is in good order, interior seems to have no issues but in the foot well near the battery there is a small section of carpet missing and there are two shiny pipes (not sure what they are for) and where they enter the central body/tunnel they are corroded. ufortunately I didn't get a picture (one of those Doh! moments!)

Markedman2020

Original Poster:

39 posts

211 months

Sunday 3rd May 2009
quotequote all
lewis_sharman said:
hmmm scratchchin




I might have to drill three holes like that . . . atm i need some boot drainage hehe
Actually I've seen the holes on all of them I was more interested in the ball joint. Lol

scotty_d

6,795 posts

225 months

Sunday 3rd May 2009
quotequote all
That is one of the anti roll bar drop links and hard to say with out giving it a shake to see if it has play in it and the vents on the front my 98 400 has them too

lewis_sharman

5,958 posts

222 months

Sunday 3rd May 2009
quotequote all
Markedman2020 said:
lewis_sharman said:
hmmm scratchchin




I might have to drill three holes like that . . . atm i need some boot drainage hehe
Actually I've seen the holes on all of them I was more interested in the ball joint. Lol
I havent noticed them on mine getmecoat

Thats the ARB droplink, the pair can be replaced for around £50 with uprated ones from Steve Heath, but tbh the ones that i have just taken off of my car looked worse than that and were still very sturdy.

My old exhaust was also in similar looking condition, but was just surface rust. Even if it is rusty, see it as an excuse to get the ACT cherrybombs cool

lewis_sharman

5,958 posts

222 months

Sunday 3rd May 2009
quotequote all
Mine doesnt have vents frown

Red Cabbage

3,606 posts

263 months

Sunday 3rd May 2009
quotequote all
I think you may need to budget for outrigger replacement at some point. Allowing the dirt and gravel to build up in the corners of the outriggers like that traps moisture for longer that's why the tubes go in this location first.

Here's my chassis shame my car isn't a 450 as it is for sale.



Edited by Red Cabbage on Sunday 3rd May 18:44

Markedman2020

Original Poster:

39 posts

211 months

Sunday 3rd May 2009
quotequote all
Red Cabbage said:
I think you may need to budget for outrigger replacement at some point. Allowing the dirt and gravel to build up in the corners of the outriggers like that traps moisture for longer that's why the tubes go in this location first.
How much is that likely to set me back? I saw an article in Sprint that talked about chopping them off and welding on new ones, a company called TvR, but they didn't mention the price.

Edited by Markedman2020 on Sunday 3rd May 18:45

S7Paul

2,103 posts

265 months

Sunday 3rd May 2009
quotequote all
Mine has all the same holes/vents as the one you're looking at, so no worries there. However, looking at the picture in your 18:04 post, I would be inclined to have a good dig with a screwdriver where that build-up of road dirt is sitting - you may just find it goes straight through. It looks like a set of Steve Heath drop links would also be on the shopping list. Also, if the chassis hasn't had much attention (as appears to be the case) what are the suspension units like? If they are the originals, you'll probably need to replace them quite soon too.

Markedman2020

Original Poster:

39 posts

211 months

Sunday 3rd May 2009
quotequote all
Red Cabbage said:
I think you may need to budget for outrigger replacement at some point. Allowing the dirt and gravel to build up in the corners of the outriggers like that traps moisture for longer that's why the tubes go in this location first.

Here's my chassis shame my car isn't a 450 as it is for sale.



Edited by Red Cabbage on Sunday 3rd May 18:44
I have actually got in contact with you but wanted to look at some lower milage versions a little closer to home before I came up. Thinking of putting around 9000miles a year on it and so a little concerned with resale value.

Edited by Markedman2020 on Sunday 3rd May 18:48

Red Cabbage

3,606 posts

263 months

Sunday 3rd May 2009
quotequote all
Markedman2020 said:
Red Cabbage said:
I think you may need to budget for outrigger replacement at some point. Allowing the dirt and gravel to build up in the corners of the outriggers like that traps moisture for longer that's why the tubes go in this location first.
How much is that likely to set me back? I saw an article in Sprint that talked about chopping them off and welding on new ones, a company called TvR, but they didn't mention the price.

Edited by Markedman2020 on Sunday 3rd May 18:45
http://www.pistonheads.com/gassing/topic.asp?h=0&a...

Edited by Red Cabbage on Sunday 3rd May 19:04