Serpentine tensioner pulley
Serpentine tensioner pulley
Author
Discussion

brian7136

Original Poster:

50 posts

212 months

Sunday 3rd May 2009
quotequote all
The bearing's knacked. Anybody know where I can buy a new pulley only? All the websites seem to list a complete assembly including the spring loaded arm for £45-50. Alternatively, has anybody just changed the bearing, which I believe is a 6203-2RS commonly used as a motorcycle wheel bearing. Mine is a non-PAS non-aircon 95 car, with a 90mm pulley below and outside the alternator. Cheers all!

steve-V8s

2,924 posts

279 months

Sunday 3rd May 2009
quotequote all
Land rover part. Take it off and go to your local landy dealer.

big geoff

387 posts

231 months

Sunday 3rd May 2009
quotequote all
Try your local bearing factor ( yellow pages )

steviegasgas

417 posts

216 months

Sunday 3rd May 2009
quotequote all
The bearing is a common one you are correct, but, you will have a terrible job replacing the bearing only, the plastic tensioner has a lip which goes over the edge off the bearing, this also seems stuck on in some way, I tried pressing mine out, but felt that putting the plastic under so much strain i didnt feel confident about it holding together when running. its a bugger that you cannot just buy the pulley and bearing without having the tensioner, but they are simply not out there for sale.

Be careful with which parts you buy from ebay, my mate is a land rover dealer, he has people coming in every week with problems with ebay and pattern chinese parts which are not up to the job and fail. So when buying running parts I always insist on genuine, hope that helps, cheers.