Anyone got a magic solution to decoking heads & pistons?
Anyone got a magic solution to decoking heads & pistons?
Author
Discussion

Barkychoc

Original Poster:

7,848 posts

235 months

Monday 4th May 2009
quotequote all
I've got my V8S cylinder heads in bits and want to get the coke off - I've just about done 2 cylinders with a green scouring pad and an awful lot of elbow grease. I haven't even touched the pistons yet.

There must be an easier way!

Any suggestions?

Mad Mitch

842 posts

259 months

Monday 4th May 2009
quotequote all
Electric drill and de coke wire brushes.

Tyre_Tread

10,697 posts

247 months

Monday 4th May 2009
quotequote all
When the cyliner heads leak they steam clean the pistons and its very effective so, if you have a steam cleaner...........

spend

12,581 posts

282 months

Tuesday 5th May 2009
quotequote all
Paraffin works fine, bit of nitromors for tough bits. Steam cleaner is fine for degreasing, but it doesn't shift the coke very well - and you have to really dry then oil everything afterwards...

Generally I just soak stuff in paraffin in an old water header tank (nice & big) and have a solvent gun with pickup pipe to blast the messy & internal bits. Must admit I try & leave stuff for a few days just agitating occasionally..

Die grinders and burrs make much shorter work of the stuff of though evilnutshehe

Simon Says

19,466 posts

252 months

Tuesday 5th May 2009
quotequote all
Cellulose thinners(gunwash)always worked well for me it strips the carbon out of all the nooks and crannies(keep away from painted surfaces and plastic)especially the piston ring grooves and works overnight but please read the instructions and it is highly volatile yikes be warned,if unsure use chemicals already mentioned smile

Barkychoc

Original Poster:

7,848 posts

235 months

Tuesday 5th May 2009
quotequote all
It sounds like I'm on the right track.

I've got a water header tank with about 35 litres of degreaser in it (the dilutable variety from Machine Mart), this is pumped from one end of the tank to the other using a 6 metre head central heating pump (thats the V8 version biggrin) - this creates a hell of a current and is bloody brilliant at degreasing pretty much anything if left on overnight - rocker covers come out like new. It hardly uses any power either.
You do need the return to the tank to be under the surface - otherwise speaking from experience the froth gets totally out of control eek

The coke in the heads is significantly softened but I was reluctant to go too mad as the heads are alloy, I assume I am OK with the decoke wire brushes then if I'm careful.

I have a steam cleaner but it didn't touch the coke, and tends to move the oil around a bit, and what comes off tends to go in your face!
It also makes your garage look like a loco shed with all that steam!

A few anorak pics below

Degrease Tank



Pump under tank, it helps if you have a neighbour thats a plumber and wants some motorbike bits degreasing biggrin
Mounted on a pair of old speaker stands.
I've had the pump kicking around for years - so it's about time it was put to good use.
No doubt the central heating pump will pack up next week.



One Rocker cover 24 hours later.
I don't have a before pic but this was really bad - if you've ever tried to clean a bad rocker cover you'll know this is a miracle! (Its not off my car BTW).





Edited by Barkychoc on Tuesday 5th May 09:51

Tyre_Tread

10,697 posts

247 months

Tuesday 5th May 2009
quotequote all
Now you tell us you have a degreasing tank. That's where I chuck mine!

Barkychoc

Original Poster:

7,848 posts

235 months

Tuesday 5th May 2009
quotequote all
The coke still takes some shifting though - it doesn't help that the engine was running too rich either I guess.

Edited by Barkychoc on Tuesday 5th May 09:54

blitzracing

6,422 posts

251 months

Tuesday 5th May 2009
quotequote all
Mr Muscle oven cleaner for the coked area, but keep it off the flat surface of the head as it eats into the alloy a tad.

350Matt

3,917 posts

310 months

Tuesday 5th May 2009
quotequote all
Another vote for oven cleaner, works a treat just don't leave it on overnight to eat into the alloy as Mark said.