Sagaris rear cans

[D14 AYS]

Need more noise I have the De-cats coming What options are there for the rear cans ?

Cheers all

[S6 ROR]

Would also be interested in changing rear cans as well to add a bit more noise. Anyone found a good alternative? I put my old carbon cans on that i had on my tuscan, but there are not quite long enough and looked a lost in the space.

Like the picture in your profile Dean

[SimonKD]

These look and sound fantastic.

[VARLEYHYD]

I think these look good too.



ACT Trackday cans - (puts the car in stealth mode at 96dba)

Sure they could be sleeved as well for some volume as dual puropse

G

[bogie]

I take it you dont like trackdays then ? LOL

even the standard cans are borderline on some places these days

[TIVVA]

Try Simon Ex off Carbon Can Co. 07899 771944

Length is probably not a problem, ehm !!

Have a set of CCC's on my Sag. Sound fine enough. A bit OTT for the track though.

Cheers,

Garry

[D14 AYS]

TIVVA said:

Try Simon Ex off Carbon Can Co. 07899 771944

Length is probably not a problem, ehm !!

Have a set of CCC's on my Sag. Sound fine enough. A bit OTT for the track though.

Cheers,

Garry

Any pics Garry?

[mr saggy]

TIVVA said:

Try Simon Ex off Carbon Can Co. 07899 771944

Length is probably not a problem, ehm !!

Have a set of CCC's on my Sag. Sound fine enough. A bit OTT for the track though.

Cheers,

Garry

I spoke to simon last week re ccc's for my sag and he informed me that the only ones he did where standard tuscan cans which will fit the sag but as mentioned earlier they look a little bit small for the hole so to speak.

[D14 AYS]

VARLEYHYD said:

Sure they could be sleeved as well for some volume as dual puropse
G

Would it be possible to sleeve the originals ?

[VARLEYHYD]

D14 AYS said:

VARLEYHYD said:

Sure they could be sleeved as well for some volume as dual puropse
G

Would it be possible to sleeve the originals ?

I understand that all the original apart from Candy are already sleeved
ie: smooth bore in the cans

G

[x 7usc]

hi dean, i was looking at your cans at sunday service actually and wondered if the "nose of the cans" could be removed and the baffles taken out, looked like the baffle tube was oval all the way so i think sleeving would prove very difficult but the nose of the cans didnt appear to have any visible wealds so maybe could be removed, just a thought.