Air Filter/Induction Kit Options?
Air Filter/Induction Kit Options?
Author
Discussion

after_shock

Original Poster:

8,751 posts

251 months

Wednesday 6th May 2009
quotequote all
Ive been cleaning my engine bay for the past couple of days (sad I know lol) but the car has been without a battery and unable to start it.

However what I have noticed and its bugging me more every time I look at it and thats the air intake system, its a little hole running down into a small air box and then back up, I really would like to fit a much better air filter to the car.

Ive seen the air box mod but would rather get something off the shelf and fit that.

Its running the 112 harrop charger can anyone point me in the direction of an air filter/induction kit as im drawing a few blanks trying to find one?

Thanks in advance

V88Dicky

7,373 posts

214 months

Thursday 7th May 2009
quotequote all
Some of the sponsors on here sell/fit the CAI kit which has a nice OEM look to it, not cheap though. Other than that there's oodles of others like K+N fipk, AEM etc that can be ordered from the States/Aus. The airbox mod you mention is easy enough and produces a much nicer induction growl, looks stock too! Total cost is around £50, thats for the K+N panel filter.

after_shock

Original Poster:

8,751 posts

251 months

Friday 8th May 2009
quotequote all
V88Dicky said:
Some of the sponsors on here sell/fit the CAI kit which has a nice OEM look to it, not cheap though. Other than that there's oodles of others like K+N fipk, AEM etc that can be ordered from the States/Aus. The airbox mod you mention is easy enough and produces a much nicer induction growl, looks stock too! Total cost is around £50, thats for the K+N panel filter.


Dont suppose you have a link to any of the kits that are available?

Im not too keen on doing the airbox mod, would rather have something a bit more visible.

nickwaiheke

352 posts

228 months

Friday 8th May 2009
quotequote all
K&N on my CV8 but a bit of a pain to get the right size

SimonV8ster

13,035 posts

259 months

Friday 8th May 2009
quotequote all
Can somebody tell me what the airbox mod is please ? Or point me in the right direction of some instructions ? smile

V88Dicky

7,373 posts

214 months

Friday 8th May 2009
quotequote all
Cant find link for the airbox mod but its fairly simple, it just involves removing the airbox then using a hole cutter to cut the biggest hole you can fit onto the front face of the box. Sand it all smooth then drop in a K+N panel filter (or similar) and put everything back together. No more than a couple of hours work, I even ordered the filter from Halfrauds!

Edited to say someone cleverer than me has found it^^^^^^^^^^^^^^^^^^^^

Edited by V88Dicky on Friday 8th May 10:07

MadMaxHSV

1,816 posts

229 months

Friday 8th May 2009
quotequote all
biggrin

SimonV8ster

13,035 posts

259 months

Friday 8th May 2009
quotequote all
Thanks for the link thumbup

So your simply opening up the airbox to let get more air in ? Seems simply enough. I take it it does not effect anyting else ? No remap needed or anything ? Doesn't effect the airflow meter, etc ?

V88Dicky

7,373 posts

214 months

Friday 8th May 2009
quotequote all
Doesn't affect anything, but your engine will breathe better and you'll notice a much deeper induction growl under load. It was the first mod I carried out and I was quite chuffed with meself, although taking a holecutter to your beloved is a bit daunting! hehe

MadMaxHSV

1,816 posts

229 months

Friday 8th May 2009
quotequote all
Won't need any tuning.

If you still have a MAF this will take everything into account.
Your still using the stock airbox from the filter back so the air path to the MAF is unchanged so won't effect the MAF tuning.

Drew SS

2,683 posts

215 months

Friday 8th May 2009
quotequote all
MadMaxHSV said:
Won't need any tuning.

If you still have a MAF this will take everything into account.
Your still using the stock airbox from the filter back so the air path to the MAF is unchanged so won't effect the MAF tuning.


whats to stop s@£t from getting in as its under the filter ???

MadMaxHSV

1,816 posts

229 months

Friday 8th May 2009
quotequote all
Air is drawn from the top. The second hole is underneath, same placement as the standard hole just another one.

Drew SS

2,683 posts

215 months

Friday 8th May 2009
quotequote all
Drew SS said:
MadMaxHSV said:
Won't need any tuning.

If you still have a MAF this will take everything into account.
Your still using the stock airbox from the filter back so the air path to the MAF is unchanged so won't effect the MAF tuning.


whats to stop s@£t from getting in as its under the filter ???


yeah sorry awake now i got it

Drew SS

2,683 posts

215 months

Friday 8th May 2009
quotequote all
i just looked at mine it already has two holes from factory any ideas on how to improve it

the muppet

669 posts

222 months

Friday 8th May 2009
quotequote all
Drew SS said:
i just looked at mine it already has two holes from factory any ideas on how to improve it
Make 'em bigger if there is room to do so.

Drew SS

2,683 posts

215 months

Friday 8th May 2009
quotequote all
the muppet said:
Drew SS said:
i just looked at mine it already has two holes from factory any ideas on how to improve it


Make 'em bigger if there is room to do so.


cool plenty of room will post a pic when done

the muppet

669 posts

222 months

Friday 8th May 2009
quotequote all
Drew SS said:
the muppet said:
Drew SS said:
i just looked at mine it already has two holes from factory any ideas on how to improve it
Make 'em bigger if there is room to do so.
cool plenty of room will post a pic when done
I'm contemplating removing the mesh from the MAF as well, any opinions anyone?

ringram

14,702 posts

279 months

Friday 8th May 2009
quotequote all
the muppet said:
Drew SS said:
the muppet said:
Drew SS said:
i just looked at mine it already has two holes from factory any ideas on how to improve it
Make 'em bigger if there is room to do so.
cool plenty of room will post a pic when done
I'm contemplating removing the mesh from the MAF as well, any opinions anyone?
Bad unless you intend to retune. Even then the mesh helps keep the airflow laminar over the element for a consistent accurate reading.
Any gains will be due to the maf no longer working properly and causing the engine to run lean (by measuring less air that actually goes in), thus accidentally correcting the stock rich condition. If you are already tuned you may end up too lean etc. Anyway bottom line, dont bother.