Whos rust proofed their car ??
Whos rust proofed their car ??
Author
Discussion

SimonV8ster

Original Poster:

13,035 posts

259 months

Saturday 9th May 2009
quotequote all
Seems theres bugger all rust proofing on the Ro's. Whos done anything about it ?

What have you used ? After doing the underside of a lightweight kit car a while ago I'd rather not get under a 2 tonne Monaro !! Has anybody had it done by someone else ?

Where are the main problem areas ?

monkfish1

12,516 posts

255 months

Saturday 9th May 2009
quotequote all
Done about 20 or so plus both of mine too

SimonV8ster

Original Poster:

13,035 posts

259 months

Saturday 9th May 2009
quotequote all
monkfish1 said:
Done about 20 or so plus both of mine too smile
So whats the cost and what do you use ??

monkfish1

12,516 posts

255 months

Saturday 9th May 2009
quotequote all
SimonV8ster said:
monkfish1 said:
Done about 20 or so plus both of mine too


So whats the cost and what do you use ??


We use all dinitrol products for inside box sections and underneath etc. The main extra job we do that most rustproofing places dont is to seal up all the seams/flanged joints with a proper OE spec 2K seam sealer as most modern vehicles have applied. Cost will be upwards from £700 depending on how much prep work is required. Bumpers, exhaust, arch liners etc are also removed during the process.

anonymous-user

85 months

Saturday 9th May 2009
quotequote all
Got mine done by Rapid, £350 for waxoiling. After getting stuck on the A1 in the snow and nearly crashing several times my Ro now lives in my garage during winter. The rest of the year it lives in Mark's having expensive bits bolted to it! Definitely worth undersealing though, after a few winters they look really rusty underneath.

l4jor

210 posts

232 months

Saturday 9th May 2009
quotequote all
Any good quality rustproofing product is better than nothing at all so don't worry about it. I check mine before and after winter so its going to last me a few years...
I only need to remove the front and rear bumpers to complete the job. Rust never sleeps so pay regular attention to the high impact areas.

davegreg

1,099 posts

220 months

Saturday 9th May 2009
quotequote all
had mine waxoyled last october at The Waxworks at Morpeth in Northumberland. Cost £350 and took a day. The car stinks for a few months afterwards though!

Windy Miller

331 posts

249 months

Saturday 9th May 2009
quotequote all
Mine gets a full Waxoyl every spring before it hits the road again. Takes about a day and a gallon of Waxoyl to go inside all the channels, doors and bits an pieces, and a couple of litres of stone chip to do the wheel arches with. Makes it stink a bit for a week or 2, but worth it as it looks like new (albeit very waxy!) underneath!

monkfish1

12,516 posts

255 months

Monday 11th May 2009
quotequote all
Rustproofing deluxe style



SimonV8ster

Original Poster:

13,035 posts

259 months

Monday 11th May 2009
quotequote all
OK - the amount you charge is now justified wink

monkfish1

12,516 posts

255 months

Monday 11th May 2009
quotequote all
SimonV8ster said:
OK - the amount you charge is now justified


We dont normally take quite that much off, certainly not the whole rear subframe, but most of the other clutter does..

SimonV8ster

Original Poster:

13,035 posts

259 months

Monday 11th May 2009
quotequote all
So the yellow marks you can see on the underside - is that the seams you have mentioned you do or is that just what it looks like before you start ?

Bonnie and Clyde

11,701 posts

223 months

Monday 11th May 2009
quotequote all
monkfish1 said:
Rustproofing deluxe style



heheYeah i did mine last weekend. Looked just like that hehe

MadMaxHSV

1,816 posts

229 months

Monday 11th May 2009
quotequote all
hmmmm looks familiar, even from the underside biggrin


monkfish1

12,516 posts

255 months

Monday 11th May 2009
quotequote all
SimonV8ster said:
So the yellow marks you can see on the underside - is that the seams you have mentioned you do or is that just what it looks like before you start ?


The yellow is the few lone seams that holden do, its all the others that get done. I'll take some pics!

after_shock

8,751 posts

251 months

Monday 11th May 2009
quotequote all
SimonV8ster said:
OK - the amount you charge is now justified


And how much is that out of curiosity?

monkfish1

12,516 posts

255 months

Monday 11th May 2009
quotequote all
after_shock said:
SimonV8ster said:
OK - the amount you charge is now justified


And how much is that out of curiosity?


Tis up there ^^^^^^

SimonV8ster

Original Poster:

13,035 posts

259 months

Monday 11th May 2009
quotequote all
Go up there ^ 12 posts, tells the cost and products used. biggrin

Drew SS

2,683 posts

215 months

Wednesday 13th May 2009
quotequote all

gsd2000

11,515 posts

214 months

Wednesday 13th May 2009
quotequote all
Another good rustproofing product is bilt hamber dynax s50. Its had really good reviews, i will be using it on mine in the summer.