Tools
Author
Discussion

Shabs

Original Poster:

1,866 posts

237 months

Sunday 10th May 2009
quotequote all
Hi All,

AM thinking that in the next 12 - 18 months I am going to take my Chim apart and put it back together. No single reason, I just want to get it sorted for the next 10 years and also, having done this before to other cars, there is no better way to learn about your P&J.

The question is on tools, I left most of my tools (except my ratchet set and grinder) in Aus when I left and would like to start stocking up over time as I found this a major cost in the past. The question is, in the UK and for a Chim, what are some good tools to have? First up would probably be an excellent set of spanners (any suggestions on brand, type, common sizes). Also, are there any specific tools to the car (like the bush removal tool) that I need to think about for a body off rebuild?

Many thanks,

Shabs

dogbucket

1,256 posts

232 months

Sunday 10th May 2009
quotequote all
Depends on what your budget is really. In regards to spanners if you want a truly excellent set then Snap-on Flank Drive Plus 10-19mm are my favs, but then at £100 a set even for used ones off ebay it is difficult to justify the price as a home mechanic (but somehow I managed it biggrin ).

Halfords Professional are generally highly thought of, although I have none myself. I think they do starter sets of all sort of bits which could be a good starting point.

350Matt

3,917 posts

310 months

Sunday 10th May 2009
quotequote all
Hello

I'd recommend halfords professional brand for kit as its well made, and has a lifetime guarantee without the snap-on price.

for TVR work you'll need a 3/8" and 1/2" drive set
a 1/2" breaker bar
Soldering iron,
multimeter
wire strippers/ crimpers etc
Screwdriver set
Set of combination spanners with some imperial sizes 9/16 and 7/16 to name a couple

That should get you going

scotty_d

6,795 posts

225 months

Sunday 10th May 2009
quotequote all
350Matt said:
Hello

I'd recommend halfords professional brand for kit as its well made, and has a lifetime guarantee without the snap-on price.

for TVR work you'll need a 3/8" and 1/2" drive set
a 1/2" breaker bar
Soldering iron,
multimeter
wire strippers/ crimpers etc
Screwdriver set
Set of combination spanners with some imperial sizes 9/16 and 7/16 to name a couple

That should get you going
+1 for the halfords professional the do a good set at around £100 which will let you do most things then just add to that as and when you need extra tools worked for me.

hibutts

38 posts

218 months

Sunday 10th May 2009
quotequote all
At least one trolley jack and a set of axel stands is a must.

HRG

72,863 posts

270 months

Sunday 10th May 2009
quotequote all
Low entry jack and 600mm stands.

As for tools, once you have the basics just buy as and when you need them.

450Nick

4,027 posts

243 months

Sunday 10th May 2009
quotequote all
Yes among other specialist things, I'd definitely recommend the halfords professional stuff. Good quality and lifetime guarantee without the Snap-on price. I have the black tool chest and top and its great. As well as this, definitely a nice long breaker bar, low entry jack, multimeter, all the usuals!

SteveW8975

6,389 posts

215 months

Sunday 10th May 2009
quotequote all
When I first worked for Halfords in the mid 90's, the professional range of tools was simply rebranded Sykes Pickevant kit, but about 60% of the price. We had very very few returns on them as well.
Not sure if it still is SP, but from the posts above, it seems they are.

HRG

72,863 posts

270 months

Sunday 10th May 2009
quotequote all
That's very interesting. The snob in me wouldn't have let me buy Hellfrauds tools but if it's basically SP I'll have to check it out next time I need something.

biggiles

2,194 posts

256 months

Sunday 10th May 2009
quotequote all
Presumably you have the Screwfix, Toolstation and Clarkes catalogues for when you need a new tool?

In addition to everyone's good advice above, I'd say decent low-entry jack + stands, and a good length of metal pipe which slots over the handle of your socket wrench to give 6ft of leverage. Makes a very large difference.

Some people also swear by impact drivers, but no personal experience.

steviegasgas

417 posts

216 months

Sunday 10th May 2009
quotequote all
I wouldnt touch the tool catalogues, generally the tools are built down to price, especially screwfix, generally complete pants.
I have had a 3/8 drive socket set from halfords still going strong after nearly twenty years and lots of use, also 1/2 drive which has had scaffold bar on the ratchet and still keeps going on.
For the home mechanic they are excellent value.
Snap-on or bluepoint are the best, but you pay for the privilege. Yes they have lifetime gaurantee but so have the halfords tools, go buy some!!