Throttle cable required
Throttle cable required
Author
Discussion

V8Dom

Original Poster:

3,547 posts

231 months

Monday 11th May 2009
quotequote all
feels like my throttle cable is starting to fray.... Any ideas where to get one??? or the length of the inner as the outer is usually fine...

Still using the car otherwise id send it down to venhill in dorking but then that means replacing the outer as well..

Dom

DHGTR

1,196 posts

272 months

Tuesday 12th May 2009
quotequote all
Hi

Well the factory is the obvious provider or Venhill in Guildford(i think) can supply a teflon coated version made to size.
I believe the factory use this cable now as well.

Dave

Stig

11,823 posts

313 months

Tuesday 12th May 2009
quotequote all
DHGTR said:
Hi

Well the factory is the obvious provider or Venhill in Guildford(i think) can supply a teflon coated version made to size.
I believe the factory use this cable now as well.

Dave
I believe the factory adopted the Venhill teflon version as standard.

Gulf -LS2

1,922 posts

233 months

Tuesday 12th May 2009
quotequote all
Hi Dom

i can get some inner if required??

V8Dom

Original Poster:

3,547 posts

231 months

Monday 18th May 2009
quotequote all
Gulf -LS2 said:
Hi Dom

i can get some inner if required??
thanks Kyle.. had a look and it looks like outer near engine a bit suspect as well so ordered a new cable and some shorter headlight covers as my front wheels are rubbing against them when i reverse.... better now all the antiroll bars are off , but ill be putting those back on as i prefered the harder ride......

thanks again guys

dom

DHGTR

1,196 posts

272 months

Monday 18th May 2009
quotequote all
Ive got the new rear covers. They are much better but still rub on a tight lock.

Dave

V8Dom

Original Poster:

3,547 posts

231 months

Monday 18th May 2009
quotequote all
if they only rub on tight lock ill be please... until i removed the rollbars they touched on half turn...

dom