Clutch vibration back with a vengeance
Clutch vibration back with a vengeance
Author
Discussion

drew.h

Original Poster:

526 posts

220 months

Wednesday 13th May 2009
quotequote all
The Chimaera had a loud vibration from the clutch when the peddle was about half way. It only did this when cold and after a while stopped all together. Its now doing it constantly when the clutch is depressed. Its a very loud vibration that sounds like I'm grinding the gears.

Any suggestions what it can be?

rev-erend

21,624 posts

315 months

Wednesday 13th May 2009
quotequote all
Sounds like the clutch release bearing is kaput, finished, past it's sell by date, a dead parrot..

drew.h

Original Poster:

526 posts

220 months

Wednesday 13th May 2009
quotequote all
I can find two part number for that, Q0014 and Q0107, which would I need (assuming that is the problem)?

My Car is a '93 which I believe original had the Rover box, but I think this has the T5 (reveres is to the right and back).

Barkychoc

7,848 posts

235 months

Wednesday 13th May 2009
quotequote all
If you're going to be taking the engine out / gearbox off you might aswell replace the entire clutch assembly while you're in there for the extra cost of the parts. Worth replacing the clutch arm and pivot too if its the Rover box, not sure about the later arrangement.

Edited by Barkychoc on Wednesday 13th May 12:45