Anyone SC'd a pre-serp?
Discussion
Mine has an Eaton 112 in the V, but the centrefugal blowers that are available now seem like an awful lot less work. You can get drive-through installations for the serpentine/intermediate engines, and I wouldn't have thought a pre-serp front end was significantly harder to do. You only need to physically mount the blower and provide a poly-V drive off the front pulley.
I understood you needed to check on pre-serp & that some could accept a longer woodruff key and the serp pulley/front end ??
Otherwise, you are into an extended crankshaft?? Plus all the extra work involved which would negate the current "easy" upgrade to a SC Power blower ??
Seems that each pre-serp needs to be checked for its suitability for the SC Power upgrade ??
Trev with a pre-serp !!
Otherwise, you are into an extended crankshaft?? Plus all the extra work involved which would negate the current "easy" upgrade to a SC Power blower ??
Seems that each pre-serp needs to be checked for its suitability for the SC Power upgrade ??
Trev with a pre-serp !!
K4TRV said:
I understood you needed to check on pre-serp & that some could accept a longer woodruff key and the serp pulley/front end ??
That would be the case if you were planning to convert your pre-serpentine engine to a serpentine front cover. But there are other approaches you can take. Mine was to use a compound pulley. There's just enough space between the front pulley and the damper to fit a 6-pk poly-V belt. As it happens that comes almost exactly in line with the standard poly-V belt on the serpentine setup. Barkychoc said:
Sorry to hijack the thread but am I reading this right that you can fit a serp front to an engine with a pre serp small journal crank?
I have a late pre serp (1992 V8S) with what looks a long woodruff key slot in the crank.
I suppose its possible the 4.0 engines were based on the interim spec LR's with small journal serps, not seen any 4.3/5.0 pre-serps like that myself. I have a late pre serp (1992 V8S) with what looks a long woodruff key slot in the crank.
I've got access to both if you want comparative length/depth of the keyways? Just don't ask me to measure the keys I know they are somewhere but I'm not going to search for them
( sods law means I'll find them now!
)Gassing Station | Chimaera | Top of Page | What's New | My Stuff



