Clutch release bearing
Discussion
drew.h said:
Its is an early Chimaera, but I think someone has fitted the T5 gearbox in the past, because reverse is to the right and back.
I'd check carefully which box is in it, whilst box swaps are not common IIRC there may have been as few (I can't really say 'many' can I now
) LT77-R380 conversions as LT77-T55 conversions, and the R380 also has reverse to the right??? Some 'early' cars did seem to get T5's in advance of others, as usual TVR just loved to keep us guessing 
IIRC quick way to tell is look at the propshaft, T5 is push on and LT77/R380 are both bolt up flanges
The release bearing on mine is also making a horrid noise, but the clutch is fine and i don't really want to be spending £100's at a garage on something that is just making a noise and not affecting drive at all.
Is it a DIY job? Ive not messed around with gearboxes and clutches before.
Is it a DIY job? Ive not messed around with gearboxes and clutches before.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




