Chimaera Suspension
Chimaera Suspension
Author
Discussion

Bunglist

Original Poster:

545 posts

261 months

Thursday 21st May 2009
quotequote all
Looking to get a suspension set for my chimaera

Any recomendations and the best place to get them from at the best money.

Cheers

scotty_d

6,795 posts

225 months

Thursday 21st May 2009
quotequote all
I used gaz seem quite good now set up paid 500 quid got them from Tim at ACT

Mr Haribo

318 posts

220 months

Thursday 21st May 2009
quotequote all
I had Gaz first but one by one they started to leak and they started to rust in the first year (the car lives in a heated garage)
I then replaced them with Racing Reds these have been really good, there a lot lighter as there made from alloy so no rusting either !
The build quality seems a lot better than Gaz.
customer service is excellent and they can set the car up with corner weighting ect too.

900T-R

20,406 posts

288 months

Thursday 21st May 2009
quotequote all
Intrax' 1K2 Black Titan jobbies plus their set up expertise have utterly transformed my car, but then again we're talking top end money for the lot, too...

If you have that sort of money to spend on your car, I can't recommend them enough though. The level of composure on country roads has to be felt to be believed, and the car now feels very 'four square' and balanced. In-town comfort has improved a lot, too as the wheel movements are much more tightly controlled.

Edited by 900T-R on Thursday 21st May 19:13

Shabs

1,866 posts

237 months

Thursday 21st May 2009
quotequote all
Dude, I see Nitron's are around £1K, what is the cost comp for Intrax? I am looking to do this shortly and would rather do it once!

900T-R

20,406 posts

288 months

Thursday 21st May 2009
quotequote all
I think Ab Shocks would be the one to answer that for the UK - I'm afraid the current exchange rate may wreak havoc though. At the current Dutch consumer price you may be looking at the thick end of £2.5K for the units I have ATM.

Bunglist

Original Poster:

545 posts

261 months

Friday 22nd May 2009
quotequote all
900T-R said:
I think Ab Shocks would be the one to answer that for the UK - I'm afraid the current exchange rate may wreak havoc though. At the current Dutch consumer price you may be looking at the thick end of £2.5K for the units I have ATM.
Thanks for this information, However, if i decided to go down this route, is there any other parts I would need to buy in conjuction with the suspension shocks???

bigdods

7,175 posts

258 months

Friday 22nd May 2009
quotequote all
If you can afford it go for the upper range of shocks - Nitrons or some such. I have Gaz Golds and they have failed to impress me on the road, if I was doing it again I would invest the extra in the Nitrons or just go for new (or reconditioned) bilsteins as I dont do track work.

900T-R

20,406 posts

288 months

Friday 22nd May 2009
quotequote all
Bunglist said:
900T-R said:
I think Ab Shocks would be the one to answer that for the UK - I'm afraid the current exchange rate may wreak havoc though. At the current Dutch consumer price you may be looking at the thick end of £2.5K for the units I have ATM.
Thanks for this information, However, if i decided to go down this route, is there any other parts I would need to buy in conjuction with the suspension shocks???
The Intrax kit is a complete, adjustable coilover kit to replace the std springs and shocks and comes with rose jointed fittings - the outfit that is setting your car up of course may find that suspension bushes, wishbones, anti-roll bar droplinks are near the end of their useful life and may need to be replaced at the same time.

STEV8E

635 posts

240 months

Friday 22nd May 2009
quotequote all
bigdods said:
just go for new (or reconditioned) bilsteins as I dont do track work.
I don't track my car, so just replaced the tired Bilsteins with new ones and was amazed at the difference.

I think too many owners drive cars with knackered shocks and think they need to go better than the originals because they do not know how good they are when new.

Obviously if you need adjustable damping then its a different story. All imho of course.

spend

12,581 posts

282 months

Friday 22nd May 2009
quotequote all
Dampers aren't going to be such a magic fix as many perceive... If you are on a budget, do bushes, BJ's, TRE's, drop links first and put up with second hand std dampers (fresh springs).. You will not see any benefit from any damper if the rest of your components are rubbish, the actual dampers only contribute a minimum amount to the imaginary problems that owners attribute to them IMHO, and TBH you can't tell that much difference between products unless the other components are nice'n tight wink

Overhere

382 posts

254 months

Friday 22nd May 2009
quotequote all
This depends so much on what you want, and what you want to spend, as other have said, a new set of "shocks" even low end like Gaz will help any car with tired shocks. I replaced my ARB drop links with SH links but in all honesty mine must have been ok because it didn't make a huge difference.

Because I track and like a stiff handelling car I did the Nitrons and replaced the springs with Ebach stiffer springs as advised by my supplier and it has transformed the handelling, and still pretty good on the road. On track and in tight corners (medium roundabouts) it's wicked, very little body roll which a standard Chim suffers from.

damol

53 posts

286 months

Monday 25th May 2009
quotequote all
I have a leaky rear shock and want o replace with Bilstein, does anyone know where I can get them from, I have done a quick web search and not found any yet?

Thanks

900T-R

20,406 posts

288 months

Monday 25th May 2009
quotequote all
TVR Power has got the latest version of the Billies.

Blown2CV

31,662 posts

234 months

Monday 25th May 2009
quotequote all
Build quality issues come and go. Apparently Gaz are on top at the moment, Racing Reds have had some recent problems. Oh and Absolutely Shocks have, as I understand it, stopped trading. Derek is now working for Gaz themselves.

Chimjunkie

2,879 posts

242 months

Monday 25th May 2009
quotequote all
Overhere said:
Because I track and like a stiff handelling car I did the Nitrons and replaced the springs with Ebach stiffer springs as advised by my supplier and it has transformed the handelling, and still pretty good on the road. On track and in tight corners (medium roundabouts) it's wicked, very little body roll which a standard Chim suffers from.
Are you really running 325F 400R springs as per your profile? I'm running 400F 325R with Nitrons and about to increase to 475F 400R.

These cars can be made to really handle. Have been out today with a few Loti and my Chim now out paces a well driven Exige. Not talking power here, it really does keep up in the twisties! cool Just need to reduce the body roll further and sort out the R888's rubbing on the inner wheel arches. Maybe its the Lotus seats I have? hehe