Any Instrument Cluster experts out there for the E34?
Discussion
Hi, can anyone help?
I have just bought a very low milage BMW E34 (1988) 530i but have problems with the instrument cluster as follows:
Speedo & Rev Counter - Fine, no problems
Intermittent / random fuel and temperature gauges
Intermittent appear/dissapearing odometer and display
Intermittent warning chimes with nothing on display
Occaisionally everything works for a few minutes then it all goes haywire again for no apparent reason. If I press the brake pedal, when its all working it goes haywire every time but it isn't exclusively related to the brake pedal. Sometimes the clock / outside temp display, (on the main heater panel) is affected to but not always.
I have removed the instrument cluster, opened it up, (exepected to see batteries in there but of course there are none) put it all back together carefully again - no change.
Does ANYONE have any ideas what is going on with it? My suspicion is that it is some wierd power or earthing problem but its driving me mad!
Thanks,
James.
I have just bought a very low milage BMW E34 (1988) 530i but have problems with the instrument cluster as follows:
Speedo & Rev Counter - Fine, no problems
Intermittent / random fuel and temperature gauges
Intermittent appear/dissapearing odometer and display
Intermittent warning chimes with nothing on display
Occaisionally everything works for a few minutes then it all goes haywire again for no apparent reason. If I press the brake pedal, when its all working it goes haywire every time but it isn't exclusively related to the brake pedal. Sometimes the clock / outside temp display, (on the main heater panel) is affected to but not always.
I have removed the instrument cluster, opened it up, (exepected to see batteries in there but of course there are none) put it all back together carefully again - no change.
Does ANYONE have any ideas what is going on with it? My suspicion is that it is some wierd power or earthing problem but its driving me mad!
Thanks,
James.
Had a mileage display issue with an E34 with the display being hard to read due to missing pixels.
I bought second hand instrument cluster, took this one apart to see how it all fitted together (very simply and easily) removed the display, took the binacle out of my car and fitted the new display panel, because the mileage is not stored on the display (its on the ECU and the coding plug i believe) the mileage was correct to the car and no mileage errors.
Job Done. ... (mine was a standard unit without the computer/check)
With your other issues I'd be inclined to get a complete cluster and just swap the coding plug.
NOTE Before attempting to remove the airbag on the steering wheel (held on by a couple of bolts on the reverse of the wheel) disconnect the battery!!!!!!
I bought second hand instrument cluster, took this one apart to see how it all fitted together (very simply and easily) removed the display, took the binacle out of my car and fitted the new display panel, because the mileage is not stored on the display (its on the ECU and the coding plug i believe) the mileage was correct to the car and no mileage errors.
Job Done. ... (mine was a standard unit without the computer/check)
With your other issues I'd be inclined to get a complete cluster and just swap the coding plug.
NOTE Before attempting to remove the airbag on the steering wheel (held on by a couple of bolts on the reverse of the wheel) disconnect the battery!!!!!!
Edited by Mustard on Monday 25th May 10:16
Thanks for the tips everyone. When the cluster works, it works well so I don't think changing it will solve the issue... (An analogy could be that it's a bit like changing a lightbulb if it only works sometimes - the lightbulb isn't the problem)
Today the display has started reading in German, (when it works) - I know how to set the langauge so that isn't the problem but I'm puzzled as to what's going on.
It seems to me like some sort of connection problem, possibly in the loom, (the fact that the brake light switch definitley interferes some how would back this theory up) maybe a ground isn't working as it should. Anyone have any other suggestions?
Thanks,
James.
Today the display has started reading in German, (when it works) - I know how to set the langauge so that isn't the problem but I'm puzzled as to what's going on.
It seems to me like some sort of connection problem, possibly in the loom, (the fact that the brake light switch definitley interferes some how would back this theory up) maybe a ground isn't working as it should. Anyone have any other suggestions?
Thanks,
James.
Gassing Station | BMW General | Top of Page | What's New | My Stuff


