Hydraulic Clutch

[Chassis 33]

Hi folks, I was just working through some old photos on my computer and found some from when I was rebuilding Taz, and converted from the early (Ford gearbox) concentric hydraulic clutch to an external slave.

The conversion was based on a Sierra release arm, and Fiat hydraulics, (the master cylinder centres match the original Girling master cylinder), with the release arm instead of a cable I had a M12 nut welded into the arm and a bolt with a dished head as the working face for the push rod from the slave, anyway pictures say a thousand words so if you're looking at some way of sorting out your clutch have a look.
http://picasaweb.google.co.uk/chassis33/TVRRestora...
Regards
Iain