E36 328 Rev limiter
E36 328 Rev limiter
Author
Discussion

rdsinterceptor

Original Poster:

12 posts

210 months

Tuesday 26th May 2009
quotequote all
Help Can anyone tellme what it shoul rev to currently the limiter is coming in at 5200,

Vixpy1

42,699 posts

295 months

Wednesday 27th May 2009
quotequote all
Should be 6400 i believe

rdsinterceptor

Original Poster:

12 posts

210 months

Wednesday 27th May 2009
quotequote all
i have removed the ABS sensors could this cause the problem, the car is being used for motorsport could do eith revs back. LOL the ABS ECU is still in place.

Vixpy1

42,699 posts

295 months

Wednesday 27th May 2009
quotequote all
Some of the later cars with DSC will go into limp home mode when the system is disabled

rdsinterceptor

Original Poster:

12 posts

210 months

Wednesday 27th May 2009
quotequote all
is there any way round it do you know the car is a 96

Vixpy1

42,699 posts

295 months

Wednesday 27th May 2009
quotequote all
Try experimenting with the abs fuses, you may need only one of them removed to disable the abs

rdsinterceptor

Original Poster:

12 posts

210 months

Wednesday 27th May 2009
quotequote all
ok i'll give it ago not much fun losing power mid corner.

rdsinterceptor

Original Poster:

12 posts

210 months

Thursday 28th May 2009
quotequote all
i was looking to fit the 325i manifold so hopefully that will help, haven't had chance to try anything yet

neil_bolton

17,113 posts

295 months

Thursday 4th June 2009
quotequote all
Vixpy1 said:
Should be 6400 i believe
scratchchin

Def then that mine has been fiddled with.

7100rpm is certainly not standard, and getting all the beans at 6400rpm ish also points that way.

Just for the OP, mine runs fine up to 7100rpm - I've been thrapping it constantly for nearly 3 years and its still loving it. These engines love to rev...

The Jackal

32 posts

228 months

Friday 5th June 2009
quotequote all
Same thing happened to my 2.8 Z3. Was a faulty rear wheel speed sensor.
HTH.

rdsinterceptor

Original Poster:

12 posts

210 months

Wednesday 24th June 2009
quotequote all
Just changed manifold and got the car running again, have got all the tc and abs disconnected no fuses or ecu yet stil won't rev past 5200 it's just like the rev limiter driving me mad and we're off to goodwood at the weekend to do a sprint

linux44

14 posts

185 months

Tuesday 26th June 2012
quotequote all
it is your abs sensor , when the abs is off , the ecu does not get any signals from it about the wheel speed thus it limits the rev to 5.5ish


check this thread and it has solution to the problem
http://www.driftworks.com/forum/technical/140819-5...