MR2 MkI spoiler - can I take it off?
MR2 MkI spoiler - can I take it off?
Author
Discussion

tim-b

Original Poster:

1,279 posts

239 months

Friday 29th May 2009
quotequote all
Hi, I'm planning on getting a mk1 mr2 as i've decided it's about time I had a fun road&track toy on the cheap!

my question is; can I remove the rear spoiler? i think it looks much better with out it, as shown in the pic. it somehow transforms the proportion, but obviously i don't want to make it unstable at high speedeek it seems they were not sold without the spoilers (ie they were standard fit), i just wonder if they're functional?



Anyone have experience of this? any help/advice much appreciated.

tim

OlberJ

14,101 posts

262 months

Friday 29th May 2009
quotequote all
Only functional for crosswinds.

Yes they're easily removable.

sadako

7,080 posts

267 months

Saturday 30th May 2009
quotequote all
They were only sold without the spoiler on a low power version that we didn't get in this country. Yes, the both the perspex spoiler and the one on the boot and the front splitter actually do stuff if you are planning to go faster than about 80 on the straight. Apparently the steering get very light without these.

There is a mod that makes the spoiler look better by moving it slightly further back that you can find on the owner's club forums.

OlberJ

14,101 posts

262 months

Saturday 30th May 2009
quotequote all
Plumley?

I don't like it myself. Rooooins the shape of the Mk1 for me.

MK_Bob

150 posts

248 months

Sunday 31st May 2009
quotequote all
I've had mine off for months, haven't had a problem with 'brisk' B-road driving, nor with high speeds. Leaves a couple of bolt holes in the middle of the boot that should be plugged, then three bolt holes each side which are outside the boot seal and don't cause a leak. I'm doubtful of any real aerodynamic effect, considering the MR2's stepped rear.

tim-b

Original Poster:

1,279 posts

239 months

Monday 1st June 2009
quotequote all
thanks for the input guys, also posted this on the mr2OC, apparently it can affect air-flow through the engine bay as well as what's been said here. will have to give it some thought i think.