Seat backs - colour coded

[klincoln01]

Have now had my T350T for 4 weeks and really enjoying every excuse to go for a quick drive - thank god for the summer evenings. Trying to put all the things I want to buy/upgrade in some sort of prioritised list I think my fist thing is colour coded seat backs. Can you buy them or do you have to spray the seat backs?

Thanks

Keith

[gilbo]

I plan to do the same, you have to spray the backs. From what I can work out from my brief inspection they aren't covers but the rear mould of the seat. It will therefore need to be removed and masked fully. Not a hard task but not as easy as if they were just covers.

[gary_de_tam]

yes, i observed this, removed the 4x alan key bolts to find it
does look like part of the seat...

[Hilti]

It's a realatively easy job, i've done it to my Tam, T350 and Sag.

Remove the seat, take out the rubber trim between the leather and the seat back, remove the 4 bolts in the seat back and slide out the seat cushon, backrest. Then peal the leather of the edge of the seat back.

Seat back should then be free to mask and spray.

J

[klincoln01]

Thanks very much for the help!

[piscola90]

Boring... why don't you coat them in Carbon like this?

http://www.esserworks.com/project_carbon.htm