Noble graphics

[The devil]

I have seen a few nobs with the rear number plate moved down and the chicken wire has noble on it. any info on where you get that written on

[alex s]

The devil said:

I have seen a few nobs with the rear number plate moved down and the chicken wire has noble on it. any info on where you get that written on

I know Twerlie ( Ross) has done it. I think it is as simple as getting a template made and spraying a different colour.

[art411y]

yes quite easy really just go down to your local sign makers and get them to digital the noble emblem onto a piece of sticky back paper place it on the wire and spray

[The devil]

art, was it you that was spraying the rear lights?

[art411y]

The devil said:

art, was it you that was spraying the rear lights?

yes it was ,or should i say still am

[The devil]

need to get them done sometime

[wessexrfc]

Had mine done while getting my wheels refurbished, door handles colour coded, (makes such a difference), side repeaters replaced with clear and chips sorted. Have to admit, most of these ideas came courtesy of Art!!. That’s what these sites are about. The guys that did mine used a tinting spray, so we didn’t have to remove the light units, just masked the area. We went for a light tint, not to dark, but dark enough to lose the yellow, looks great. Will try to post some pics when I get chance. Planning to make the trip to “The Raleigh Rally” at Sherborne castle this Sunday. Should be a good gathering, if anyone is up for it the details are on PH south west

[Twerlie]

alex s said:

The devil said:

I have seen a few nobs with the rear number plate moved down and the chicken wire has noble on it. any info on where you get that written on

I know Twerlie ( Ross) has done it. I think it is as simple as getting a template made and spraying a different colour.

that'll be me then!

I made up a template from card by scaling it up from the 'Noble' font. I still have the letters somewhere?

Then i masked up the surrounding area and sprayed it a dark Grey so it was quite subtle. I think it looks quite good myself...

[art411y]

The devil said:

need to get them done sometime

if you want as others have,send me a set of new ones or the old ones and i will do them for you

[art411y]

Twerlie said:

alex s said:

The devil said:

I have seen a few nobs with the rear number plate moved down and the chicken wire has noble on it. any info on where you get that written on

I know Twerlie ( Ross) has done it. I think it is as simple as getting a template made and spraying a different colour.

that'll be me then!

I made up a template from card by scaling it up from the 'Noble' font. I still have the letters somewhere?
i like this look but, the bloody vosa mob have struck in my area .my mate who has a noble has the same rear end .he got a letter through with a 60 pounds fine and 3points for the plate .irregular sizing and the use of ghost lettering as a background

Then i masked up the surrounding area and sprayed it a dark Grey so it was quite subtle. I think it looks quite good myself...

[madasapig04]

nice moter!!
can i ask which clear side repeaters can u use on a 3r and i know this been up 1001 times but where u get the rear lights from thanks

[Dave2P]

Lovely car Twerlie - where did you get your rear number plate made up?

Edited by Dave2P on Thursday 18th June 20:26

[S26VE P]

madasapig04 said:

nice moter!!
can i ask which clear side repeaters can u use on a 3r and i know this been up 1001 times but where u get the rear lights from thanks

Please dont try to find the rear lights, More likely to get some rocking horse **** Been tried time/time again. Now marcos have gone they are NOT available

[Twerlie]

Dave2P said:

Lovely car Twerlie - where did you get your rear number plate made up?

YHM

Edited by Twerlie on Friday 19th June 10:44

[madasapig04]

can i ask which clear side repeaters can u use on a 3r

[alex s]

madasapig04 said:

can i ask which clear side repeaters can u use on a 3r

Halfords see a good quality set.( never thought I would say that) . they are a generic oval led set(which stick on)

[madasapig04]

can u tell me do they have a code or anything that can help coz trying to get them muppets to fined any thing is hard work

[david.mt]

madasapig04 said:

can u tell me do they have a code or anything that can help coz trying to get them muppets to fined any thing is hard work

Not sure there is a code but they are for a Ford (Fiesta - I think) and are around £19.99. HTH. You think a code would help with those muppets

Just in case ... Cat code: 642702-0

http://www.halfords.com/webapp/wcs/stores/servlet/...

Edited by david.mt on Thursday 18th June 17:30

[madasapig04]

thank u very much

[wessexrfc]

Got my clear side repeators off e-bay after struggling at Halfords. Brought mine through a ebay shop called "Performance Creations", or search for mk1 mondeo side repeators. I paid £8.95 + £2.95 P&P inc bulbs, they fit and work perfect.