mil light help needed

[racingmjl]

hi all my mil light and buzzer stay on even when the car starts its runs fine and ticks over. it started doing this today after i put the battery on charge over night. the battery was that flat that the alarm was going off . could it be a fuse somewhere thanks mark

[Tanguero]

Sounds like the ECU is seeing a faulty sensor/input somewhere. Connect up a laptop and check the fault logs. Should lead you straight to it.

[racingmjl]

thanks for reply is there anybody in the midwales area with the lead and software for the speed six or could some one please tell me the best place to buy lead and software thanks mark

[Tanguero]

The software is available for free from
http://homepage.ntlworld.com/dave.hinns/software.h...
or
http://www.tvr-cerbera.co.uk/software.html

If your ECU has a DB9 connector inside, then a standard 9 pin serial lead will work - however if you have a 3 pin plug in the ECU harness you will need to either make one or get one from http://clever-trevor.net/part/140/raceproved-ecu-t...