Oh....thats not good
Discussion
Hi
After giving the car a little tlc today I tried to close the bonnet & it wouldnt shut properly & made a nasty graunching sound as I pushed it down.
Obviously I didnt force it, & spent a few minutes trying to find what was catching.
I found the culprit, where the bonnet is connected to the two fixings/hinges near the windscreen, the nearside one seems to have moved back into the bulkhead! As a result it wouldnt allow the bonnet to close.
We took it off & tried to adjust the hinge, but it was very difficult to do as it kept moving back under the windscreen...the offside hinge is fine & is working correctly.
Ive noticed the two hinges seem to be connected across the width of the car by a steel rod, but I cant see how to get at it.
Any thoughts?
I managed to get the bonnet back on & closed it porperly, but it needs sorting.
Thanks in advance.
Nick
After giving the car a little tlc today I tried to close the bonnet & it wouldnt shut properly & made a nasty graunching sound as I pushed it down.
Obviously I didnt force it, & spent a few minutes trying to find what was catching.
I found the culprit, where the bonnet is connected to the two fixings/hinges near the windscreen, the nearside one seems to have moved back into the bulkhead! As a result it wouldnt allow the bonnet to close.
We took it off & tried to adjust the hinge, but it was very difficult to do as it kept moving back under the windscreen...the offside hinge is fine & is working correctly.
Ive noticed the two hinges seem to be connected across the width of the car by a steel rod, but I cant see how to get at it.
Any thoughts?
I managed to get the bonnet back on & closed it porperly, but it needs sorting.
Thanks in advance.
Nick

One word of warning - make sure the back edge of the bonnet does not catch under the windscreen. One of my hinges went a bit wonky and when I shut the bonnet it just cuaght the underside of the screen by about 1/8 inch. Result - small crack in the screen at point of contact which by morning had grown the full height. New screen, and all the hassle that implies!
ncs said:
Del 203 said:
Has the fibre glass broken around it ?
Hi DelDoesnt look like it.
It has rubber around it which appears to have 'gone' but the fibreglass looks ok.
Our local Manbulance driver is coming round tonight to point & laugh as we try to investigate



Gassing Station | Griffith | Top of Page | What's New | My Stuff





