Full bore miss fire
Discussion
went out last night for a blast ....just had to be done !! and i got a couple of hiccips on full boost ,did it on the rolling road day but has not played up since wonder if it could be plug gap as i gapped them at 40thou but have since read 36thou is better , does not feel like fuel as its a very sudden hiccup also if i,m gentle with the boost and feed it in rather than just flooring it,it does not do it any ideas guys ??
Edited by TuxMan on Friday 26th June 09:02
have inspected pipe earlyer in the year and it looked in good order ....over the winter i,m going to change all the fuel system ,tank was full to the brim so would have thought there would be enough gravity pressure to keep pipe expanded ?? will have another look over the weekened . simon
Duke Thrust said:
Hi Simon,
It sounds like you have the same problem as me. The waste-gate actuator shaft on the front turbo has warped ever so slightly and it sticks causing the cough as the boost map goes bonkers for a second.
I need to take the turbo off and get the shaft/housing machined.
have applied vacuum/pressure to prove this?It sounds like you have the same problem as me. The waste-gate actuator shaft on the front turbo has warped ever so slightly and it sticks causing the cough as the boost map goes bonkers for a second.
I need to take the turbo off and get the shaft/housing machined.
Adrian W said:
Duke Thrust said:
Hi Simon,
It sounds like you have the same problem as me. The waste-gate actuator shaft on the front turbo has warped ever so slightly and it sticks causing the cough as the boost map goes bonkers for a second.
I need to take the turbo off and get the shaft/housing machined.
have applied vacuum/pressure to prove this?It sounds like you have the same problem as me. The waste-gate actuator shaft on the front turbo has warped ever so slightly and it sticks causing the cough as the boost map goes bonkers for a second.
I need to take the turbo off and get the shaft/housing machined.
We have seen this on the dyno recently, sticking wastegate shaft, not fully closing, and sticking the hotter the car gets causing differing boost profiles for no immediately apparent reason, then getting worse and causing overboost/boost spikes.
Re machine of wastegate penny shaft required to fix.
Mike
Re machine of wastegate penny shaft required to fix.
Mike
Gassing Station | Noble | Top of Page | What's New | My Stuff



