List of error codes

[klincoln01]

I've got Error Code 1 popping up on the screen for a second just after I start up my T350 and then it disappears. I've trawled thro the forums and although I've seen several promises of a list of error codes I haven't actually seen one. Does anybody:
1. Know what error code 1 indicates
2. Know if the list of codes has actually been published

Many Thanks in advance

[Jezz172]

Is it low oil pressure?

mine pops up when it's cold but goes after a second or 2

[BatleyBoy]

Im not sure on the T350 but these are the codes for a TUSCAN MK1. I think they maybe the same?

* A - Speedo sensor not activating zero switch
* B - Speedo sensor not releasing zero switch
* C - Water level sensor not activating zero switch
* D - Water level sensor not releasing zero switch
* E - Fuel level sensor not activating zero switch
* F - Fuel level sensor not releasing zero switch
* G - Water level sensor open circuit
* H - Air temp sensor open circuit
* I - Oil temp sensor open circuit
* J - Oil pressure sensor open circuit
* K - Fuel level sensor open circuit
* L - Erratic road speed sensor input
* O - No communications between analogue and control

[K100]

Not sure how accurate this is but it was posted on the TVRCC site some time back.......

Warning Screen Codes are as follows:
Oil_P_Under_Min =0x01 =1
Oil_P_Over_Max =0x02 =2
Oil_P_Lamp_On =0x03 =3
EFI_MIL_Lamp_On =0x04 =4
Water_T_Over_Max =0x05 =5
Oil_T_Over_Max =0x06 =6
Battery_Over_Max =0x07 =7
Alternator_Lamp_On =0x08 =8
Inertia_Lamp_On =0x09 =9
Battery_Under_Min =0x0a =10
Fuel_L_Under_Min =0x0b =11
Air_T_Under_Min =0x0c =12
Brake_Fluid_Lamp_On =0x0d =13
RH_Door_Lamp_On =0x0e =14
LH_Door_Lamp_On =0x0f =15
Light left on =0x10 =16
No seat belt =0x11 =17
Gear_T_Over_Max =0x12 =18
Diff_T_Over_Max =0x13 =19
Low_Fuel_Pressure =0x14 =20
High_Fuel_Pressure =0x15 =21
Fault Codes are as follows:
Water sensor =0x80 =128
Oil temp sensor =0x81 =129
Oil pressure sensor =0x82 =130
Fuel level sensor =0x83 =131
Air temp sensor =0x84 =132
Speedo zero =0x85 =133
Tacho zero =0x86 =134
Heater controls =0x87 =135
Heater flap zero =0x88 =136
Aircon Fault =0x89 =137
Gear_T_Sensor_Fault =0x8a =138
Diff_T_Sensor_Fault =0x8b =139
Fuel_P_Sensor_Fault =0x8c =140
Brake Fluid Sw.fault =0x8d =141
Unused =0x8e =142
Unused =0x8f =143
Power supply control =0x90 =144
Display FRAM failed =0x91 =145
Display FRAM corrupt =0x92 =146
Stepper FRAM failed =0x93 =147
Stepper FRAM corrupt =0x94 =148
Time clock failed =0x95 =149
Time clock corrupt =0x96 =150
Inter uP comms failed =0x97 =151
System initiation =0x98 =152
software invalid =0x99 =153
display switches fault =0x9a =154

[klincoln01]

Top stuff, Thanks very much - looks like a low oil pressure alarm that may just be a spurious alarm as it soon disappears.