Brake Pad change - Winding tool needed for calipers?
Brake Pad change - Winding tool needed for calipers?
Author
Discussion

L33

Original Poster:

3,469 posts

253 months

Monday 6th July 2009
quotequote all
I've just ordered a new set of Pads for the Sagaris biggrin

Finially settled on redstuff pads - DP3036 front and DP3617 rears. By playing different suppliers off against each other and taking advantage of pricematch, I got them down to £103 delivered from Larkspeed bandit

My question is do I need a tool to wind back the callipers in order to fit the new pads? I remember fitting pads to a VW Passat without the windback tool a few years ago wouldn't bother again without the tool.

Any ideas please guys?

thumbup

TVR_owner

3,349 posts

220 months

Monday 6th July 2009
quotequote all
L33 said:
I've just ordered a new set of Pads for the Sagaris biggrin

Finially settled on redstuff pads - DP3036 front and DP3617 rears. By playing different suppliers off against each other and taking advantage of pricematch, I got them down to £103 delivered from Larkspeed bandit

My question is do I need a tool to wind back the callipers in order to fit the new pads? I remember fitting pads to a VW Passat without the windback tool a few years ago wouldn't bother again without the tool.

Any ideas please guys?

thumbup
Rears yes, fronts no.

VARLEYHYD

2,244 posts

236 months

Monday 6th July 2009
quotequote all
L33 said:
I've just ordered a new set of Pads for the Sagaris biggrin

Finially settled on redstuff pads - DP3036 front and DP3617 rears. By playing different suppliers off against each other and taking advantage of pricematch, I got them down to £103 delivered from Larkspeed bandit

My question is do I need a tool to wind back the callipers in order to fit the new pads? I remember fitting pads to a VW Passat without the windback tool a few years ago wouldn't bother again without the tool.

Any ideas please guys?

thumbup
Not tried redstuff, but Ford wind back tool

Really needed to do the job properley and with damaged to caliper & hands

Apply copper slip to back contact areas to reduce squeal


Need drift (or a nail) to push retainers out on front pads

G

L33

Original Poster:

3,469 posts

253 months

Monday 6th July 2009
quotequote all
thumbup Cheers Guys.

I knew I didn't need for the front but suspect I did for the back. Halfrauds sell a universal tool for about £20. I'll go and pick one up.

thumbup

blackiepaul

1,973 posts

223 months

Monday 6th July 2009
quotequote all
Lee,

Good news that your wheels are dark as you will need them to be with the amount of dust you will get from redstuff.

Used them once on a 350Z, not great pads fr me but if you are not going near a track then they may be ok.

Paul........

L33

Original Poster:

3,469 posts

253 months

Monday 6th July 2009
quotequote all
I got them as they are meant to give LESS dust than ordinary pads?
See here:
http://www.ebcbrakes.com/automotive/redstuff_brake...

confused

Edited by L33 on Monday 6th July 16:07

blackiepaul

1,973 posts

223 months

Monday 6th July 2009
quotequote all
L33 said:
I got them as they are meant to give LESS dust than ordinary pads?
See here:
http://www.ebcbrakes.com/automotive/redstuff_brake...

confused

Edited by L33 on Monday 6th July 16:07
Hi Lee,

Sorry if I sounded a bit harsh. I bought pads for two cars when I bought some redstuff and ended up selling the second set.

All pads have their pros and con's with a balance between fade, dust, noise, stopping power etc etc. I was deeply disappointed with redstuff though they will probually be ok on the rears as they do not get used a lot.

This is just my opinion, I only had the origonals that were on the car for about 100 miles as I swapped them for DS2500's which have been great on an off track though they do squeel like pigs when hot.

I am hoping to have a new complete set of brakes soon which will probually create a lot of dust!

Paul.......




L33

Original Poster:

3,469 posts

253 months

Monday 6th July 2009
quotequote all
Cheers bud.
I'll give them a go. If I'm not happy with them, I'll send them back.
I'm on the bogie run next weekend so a jaunt to (sunny) Cornwall and back and all the driving down there should bed them in nicely.
thumbup

Barry Ashcroft

1,958 posts

250 months

Monday 6th July 2009
quotequote all
I also swapped to DS2500's all round they are great both on road & track and give off very little dust.

Tangoed

924 posts

244 months

Tuesday 7th July 2009
quotequote all
Totally agree! Red stuff give off more dust DS2500 are the way to go.

L33

Original Poster:

3,469 posts

253 months

Tuesday 7th July 2009
quotequote all
Too late as now fitted.
I must say that although not bedded in yet and I have not given them any emergency stops, they appear to be more responsive than the standard pads. Less pedal travel and feels more confident under braking.

If they do give too much dust off, I'll try returning them.

Anyone got a link / part numbers for the DS2500's?

thumbup

willtvr

1,099 posts

226 months

Tuesday 7th July 2009
quotequote all
L33 said:
Too late as now fitted.
I must say that although not bedded in yet and I have not given them any emergency stops, they appear to be more responsive than the standard pads. Less pedal travel and feels more confident under braking.

If they do give too much dust off, I'll try returning them.

Anyone got a link / part numbers for the DS2500's?

thumbup
Personally found Yellowstuff a good compromise for road/track on previous car but now have F4 compound and they're superb.

TVR_owner

3,349 posts

220 months

Wednesday 8th July 2009
quotequote all
willtvr said:
L33 said:
Too late as now fitted.
I must say that although not bedded in yet and I have not given them any emergency stops, they appear to be more responsive than the standard pads. Less pedal travel and feels more confident under braking.

If they do give too much dust off, I'll try returning them.

Anyone got a link / part numbers for the DS2500's?

thumbup
Personally found Yellowstuff a good compromise for road/track on previous car but now have F4 compound and they're superb.
F4s are the pad for serious track use (and good on road).

As an aside, if anyone thinks the rear pads do nothing, get the wrong compound and from new, they won't last a hard afternoon at a track like like Oulton.