Is this a lot of camber

[Pentoman]

According to a laser alignment printout I have -1.1 degrees and -1.45 degrees on the front wheels. The spec that I've found says it should be between 0.15 and 0.45. There wasn't time to adjust it but is this bad? It's a rear wheel drive roadgoing Mercedes by the way. It pulls left a bit.

[GreenV8S]

No it's not a huge amount, but being different from side to side might account for some of the pulling.

[stevesingo]

Remember that some perceived pulling to the left is actually caused by the camber in the road. Try to find somewhere flat or with a camber sloping to the right to test this.

Steve