New Indicator Stalks Nearly Ready

[Mjpmark]

Heres my babies nearly ready for install.

[738 driver]

Do they include improved bushes/springs Mark?
The standard items might have a hard time keeping those nice stalks under control when combined with your low profile's.

[Mjpmark]

Haha im sure they'll cope

[Steve_D]

Mjpmark said:

Haha im sure they'll cope

I don't believe the comment was in jest.
Others who have fitted ali stalks to the standard switch gear have found everything switching on when they go over a bump or instead of the indicator cancelling it goes through to the other side.

Unless those have been well bored out you may have the same problem.

Steve

[Mjpmark]

As with all adventures i embark upon, i will ensure what needs to be done is done. All in the name of improvement and development.

[UltimaCH]

Nice and great looking job. A must in the build. Now, with black anodized that would be real class imo...

[V8 Vum]

Hey mark,

For some reason your pickys dont seem to appear (just the red X), but like many I have just had to upgrade to EI8 browser. Noticed that some piccys show and others don't.

Anyone out there got a solution?

cheers

Keith

[Mjpmark]

Hi Keith,

Photobucket is down at the moment so probably explains why pics wont show. Dont think there is anything we can do with that one.

[UltimaCH]

I can see the photos no problem.

[Mjpmark]

Me too, further to the above - they have been bored out to circa 1mm wall thickness therefore i should have no issues with the weight overcoming the detent/springs in the main body of the switch.

[deadscoob]

Have you done these as one offs or are you planning on selling them if there's enough demand?

[Mjpmark]

Other than taking a little time, more can be done without problem just email me for more details.

Regards Mark

[GTRCLIVE]

Are the pieces Glued over the original Stalks ? So are they very thin and therefore very light ??

[UltimaCH]

Perhaps its a trade secret

[Mjpmark]

the stalks are 100% Aluminium alloy apart from the switchgear that is housed inside the stalks, as this is obviously made of a non conductive material, namely thermosetting plastic.
Hope this helps