Wipers and washer spray not working?
Discussion
From what I've seen so far there is a control box in the steering column that produces the wash, speed 1, speed 2 output signals from the starring wheel button inputs. (Intermittent is pulses on the speed 1 signal.)
These three signals enter the wiper control box in the passenger foot well and are beefed up to high current supplies via the relays. These high current drives then go directly to the wiper motor.
Hope this helps.
These three signals enter the wiper control box in the passenger foot well and are beefed up to high current supplies via the relays. These high current drives then go directly to the wiper motor.
Hope this helps.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


