Window seal
Author
Discussion

K12AN

Original Poster:

154 posts

209 months

Saturday 15th August 2009
quotequote all
Does anyone know where I can get a replacement rubber seal...the one which runs between the glass and the windscreen pillar....my one on my driver side is pretty messed up.
I am going to tidy up my Tam roof with some new seals and want to do the front ones as well.

Cheers

darkmark07

702 posts

227 months

Saturday 15th August 2009
quotequote all
Not sure if they're the same as the T350 in profile but if so, apparently Mk1 Ford Focus door seals will work (IIRC slightly thicker than the std which means that the door will pop open more easily when you press the button).

Failing that try woolies trim: http://www.woolies-trim.co.uk/c-322-extrusion.aspx

Can't remember the profile off-hand but call them or do a search on here to find it.

Cheers,

Mark

sidpinup

1,006 posts

284 months

Saturday 15th August 2009
quotequote all
These guys had every seal I needed when I did the roof top and hoop and screen. Next day deliver too.

http://www.sealsdirect.co.uk/

Ed

K12AN

Original Poster:

154 posts

209 months

Sunday 16th August 2009
quotequote all
sidpinup said:
These guys had every seal I needed when I did the roof top and hoop and screen. Next day deliver too.

http://www.sealsdirect.co.uk/

Ed
Thanks, they look like they would definately have what I am after...you don't remember the seal part numbers do you?...they all look the same to me!
I will probably redo all the seals i.e. the roof panel strips and the windscreen/window seals, maybe even the door ones.

Also, did you fit the seals yourself? I fance having a go, but you may be able to share some tips if you have experience in this.


Edited by K12AN on Sunday 16th August 02:13

sidpinup

1,006 posts

284 months

Sunday 16th August 2009
quotequote all
I cant remember the serial numbers but the pics they have are good so just find the one that matches. They are easy to fit, just pull the old ones off and then tap the new ones in place with you hand and cut to fit. If you are doing the whole run round the doors and screen remeber to put the drain ponts in by sticking the seal flat with a bit of super glue or they drain into the car. You will see the drain points on the seals you take off.

Hope this helps.

Ed

K12AN

Original Poster:

154 posts

209 months

Monday 17th August 2009
quotequote all
Cheers mate...that sounds like a DIY job then. I love getting my hands dirty!
Wanna do this now so I don't get a faceful of water when the rain starts again.