Quick question about heads?
Discussion
Does nobody bother taking the standard heads off and getting them ported/polished/flowed whatever the terminology is?
Would this not give good performance gains along with being cheaper than buying all new items, or are new performance related items of a complete different hardware design so that they yield much bigger gains?
Would this not give good performance gains along with being cheaper than buying all new items, or are new performance related items of a complete different hardware design so that they yield much bigger gains?
I wouldn't have thought it was worth it. There are some really well priced aftermarket heads which Stevie pointed me in the direction of, one of the being Patriot. I assume you would be doing this in conjunction with a cam, if not you would possibly be better doing the cam first.
https://www.patriot-performance.com/xcart/
https://www.patriot-performance.com/xcart/
Price of labour costs and skill sets here in the UK, then combining with sourcing parts...means that do get a set of heads ported here in the UK>.would likely cost 2-3 times what it would to get the same from the US.
Most of the stuff from the US in relation to fully assembled heads, are a bargain. Good heads are always worth having.
Most of the stuff from the US in relation to fully assembled heads, are a bargain. Good heads are always worth having.
TerryS said:
I wouldn't have thought it was worth it. There are some really well priced aftermarket heads which Stevie pointed me in the direction of, one of the being Patriot. I assume you would be doing this in conjunction with a cam, if not you would possibly be better doing the cam first.
https://www.patriot-performance.com/xcart/
https://www.patriot-performance.com/xcart/
Thanks for the link, actually they are a lot cheaper than I would have expected! But what does LS2 2.02"/1.57" 64cc all that mean? lol
As a really stupid question on cams (I apologise in advance) a couple of good egineer mates will gladly fit heads and a cam for me, if they do this could the car then be driven to somewhere to get it mapped or would I have to get it took on a trailer?
after_shock said:
Thanks for the link, actually they are a lot cheaper than I would have expected! But what does LS2 2.02"/1.57" 64cc all that mean? lol
As a really stupid question on cams (I apologise in advance) a couple of good egineer mates will gladly fit heads and a cam for me, if they do this could the car then be driven to somewhere to get it mapped or would I have to get it took on a trailer?
LS2 is head type, 2.02"/1.57" is the intake/exhaust valve size & 64cc is the combustion chamber size.
I wouldn't like to say on your stock tune.
ringram said:
Yeah as long as it starts and idles then the o2 sensors and if you have it the MAF will keep fueling close to ok. Just dont hammer it until its tuned.
If you change the injectors then you really should get the tune adjusted before startup otherwise it will be a chaotic mess.
If you change the injectors then you really should get the tune adjusted before startup otherwise it will be a chaotic mess.
Do you think injectors would need to be altered? LS3 heads look a cheap mod are they a direct bolt on or is that asking too much!?
Is it simply a case of doing the following for the heads and cam:
If LS3 heads fit?
www.partsworldperformance.com/product_details.php?category_id=173&item_id=930
Or if the above dont fit on easily:
www.partsworldperformance.com/product_details.php?category_id=90&item_id=908
and this for the cam:
www.partsworldperformance.com/product_details.php?category_id=90&item_id=909
Im guessing the above probably arent ideally suited to a S/C engine but in theory would they be the only parts that are needed for the actual build, just so I can sit down and start working out costs?
If LS3 heads fit?
www.partsworldperformance.com/product_details.php?category_id=173&item_id=930
Or if the above dont fit on easily:
www.partsworldperformance.com/product_details.php?category_id=90&item_id=908
and this for the cam:
www.partsworldperformance.com/product_details.php?category_id=90&item_id=909
Im guessing the above probably arent ideally suited to a S/C engine but in theory would they be the only parts that are needed for the actual build, just so I can sit down and start working out costs?
ringram said:
If you have an LS2 they will fit, if its LS1 they wont.
The hot cam probably has a bit more overlap than you want in a blower.
The hot cam probably has a bit more overlap than you want in a blower.
Yeah I have the LS2. The above where just a quick look in a u.k site, but in theory I would literally just need the above to do the install?
Did read that with the LS3 heads some sensor needs to be fitted that isnt a direct swap for the LS2 item?
std rockers are perfectly fine.
But yes, upgrade pushrods at same time...although if doing heads and cam, you'll need to install everything and measure what length pushrod you need.
Or contact Ron at Vengeance racing, and I'm sure he would sell you a compelte package of all parts needed.
But yes, upgrade pushrods at same time...although if doing heads and cam, you'll need to install everything and measure what length pushrod you need.
Or contact Ron at Vengeance racing, and I'm sure he would sell you a compelte package of all parts needed.
after_shock said:
Will stick with the LS2 versions then as changing anything to do with the blower appears to be a minefield.
Roller rockers or similar terminology keep cropping up in stuff that I read, are they something that are needed to be fitted?
Roller rockers usually mean a single roller bearing is fitted at the valve end of the rocker where it rolls across the valve stem. LSx rocker arms (valve arms) have a load of needle roller bearings at the pivot point so are rollers in that sense but they don't have a roller bearing at the valve end of the rocker arm, unlike true roller rockers. The terminology is a bit confusing.Roller rockers or similar terminology keep cropping up in stuff that I read, are they something that are needed to be fitted?
Oh, you don't need roller rockers imo. They're nice and all that but ls engines rev well with stock rocker arms.
Boosted LS1 said:
after_shock said:
Will stick with the LS2 versions then as changing anything to do with the blower appears to be a minefield.
Roller rockers or similar terminology keep cropping up in stuff that I read, are they something that are needed to be fitted?
Roller rockers or similar terminology keep cropping up in stuff that I read, are they something that are needed to be fitted?
Roller rockers usually mean a single roller bearing is fitted at the valve end of the rocker where it rolls across the valve stem. LSx rocker arms (valve arms) have a load of needle roller bearings at the pivot point so are rollers in that sense but they don't have a roller bearing at the valve end of the rocker arm, unlike true roller rockers. The terminology is a bit confusing.
Oh, you don't need roller rockers imo. They're nice and all that but ls engines rev well with stock rocker arms.
Thanks for that, yes they are a bit confusing as to what people are going on about but if the standard are good enough shall stick with those!
ringram said:
LS2 heads arnt to bad as is. It depends what power level you are after.
The right cam should get you a good upgrade by itself.
Injector upgrade will depend on total power etc. Do a google for "fuel injector calculator" pop in your bhp and out comes required injector flow.
The right cam should get you a good upgrade by itself.
Injector upgrade will depend on total power etc. Do a google for "fuel injector calculator" pop in your bhp and out comes required injector flow.
Would I not benefit from a larger combustion chamber size with it being FI?
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


