Would these Spiders fit a Cerb ?

[Ireland]

http://www.pistonheads.com/sales/1011479.htm

I came across these in the classifieds and was wondering would they fit a Cerb?

I seem to remember reading that the offset for a Cerb was 35 at all corners (but I may be wrong).

I reckon I might chance them if they would fit.

[Allandwf]

Thats what I have on mine. The rears used to rub with SO3's on, but ok now with Goodyears. You will need spacers/lock stops on the rack to stop the fronts hitting the wishbones, about a fiver and an easy fit job.

Edited by Allandwf on Tuesday 18th August 11:16

[julian64]

strange that they say they are silver yet are showing a picture of anthracites

[geordieexpat]

you sure, my anthracites I had on the Sag were darker than those in the pictures

[Allandwf]

I thought there was an anthracite hanging on the wall in the background.

[Brummmie]

I've seen Cerberas fitted with both offset's, so they will fit, but will they rub??

[saranigel]

mine are 35 offset all round

[Ireland]

When you say that they will rub do you mean that the tyres touch somewhere or do the rims touch off something?

Will fitting spacers reduce the already-poor turning circle?

[Allandwf]

Yes to both. The rears , may,rub on the arches. Bit hit or miss due to the handmade nature of the cars. The rims will hit the wishbones on full lock, spacers required,they are split so easy fit just pull back the gaitor on the rack fit them then pull gaitor back.Yes they do reduce the turning circle.