camshafts

[knowall]

Hi,
I woundered if a 5LTR cam would be ok in a 4LTR griff and what the outcome would be?

[spend]

If you haven't got a 'real' HC the valves might hit the pistons, you will also probably need a vernier cam gear to dial the cam in?

Your heads may also be unable to tolerate the lift - the tops of the guides are shortened to make room for the higher lifts, don't know if this was done on all TVR heads?

[rev-erend]

Best bet - is to call Dom at TVR Power and ask him...