Discussion
What would adding a decent cam do to our performance?? It's been suggested that a Corvette cam and tune would work well on our car??????. Thinking of what to do as soon as diff and RRP are done. Possibly before thunder road. NEED MORE SPEED. But don't a SC
I repeat WE DO NOT WANT A SUPERCHARGER
Maybe Richard?????????????????????
I repeat WE DO NOT WANT A SUPERCHARGER
Maybe Richard?????????????????????
Mel you know you have to start with what rwhp you want and work back from there!
Best you can hope for cam only would be maybe 360rwhp probably a little less.
If you want it to be smooth and gentle at idle then a cam might not be for you.
Personally Id be tempted with a set of 1.85:1 roller rockers. Nice easy bolt on and you should gain maybe 15rwhp.
Cheap too. Pretty much a DIY job with one 8mm socket IIRC. That will make your cam 8% bigger.
If you do want something with a definate cam feeling then stay small in the LS1, something like a 220/224-114
But do you have headers already?
As already mentioned, once you start you might not be able to stop!
I also agree on the OTRCAI.
Tread slowly and carefully
Drive some other cars first before you decide.
Best you can hope for cam only would be maybe 360rwhp probably a little less.
If you want it to be smooth and gentle at idle then a cam might not be for you.
Personally Id be tempted with a set of 1.85:1 roller rockers. Nice easy bolt on and you should gain maybe 15rwhp.
Cheap too. Pretty much a DIY job with one 8mm socket IIRC. That will make your cam 8% bigger.
If you do want something with a definate cam feeling then stay small in the LS1, something like a 220/224-114
But do you have headers already?
As already mentioned, once you start you might not be able to stop!
I also agree on the OTRCAI.
Tread slowly and carefully

Drive some other cars first before you decide.
ringram said:
Mel you know you have to start with what rwhp you want and work back from there!
Best you can hope for cam only would be maybe 360rwhp probably a little less.
If you want it to be smooth and gentle at idle then a cam might not be for you.
Personally Id be tempted with a set of 1.85:1 roller rockers. Nice easy bolt on and you should gain maybe 15rwhp.
Cheap too. Pretty much a DIY job with one 8mm socket IIRC. That will make your cam 8% bigger.
If you do want something with a definite cam feeling then stay small in the LS1, something like a 220/224-114
But do you have headers already?
As already mentioned, once you start you might not be able to stop!
I also agree on the OTRCAI.
Tread slowly and carefully
Drive some other cars first before you decide.
Much appreciated thank you. We do have headers and i don't mind the lumpy cam as long as its not too much. I'm always afraid with modding i could ruin a perfectly good car. We wouldn't mind 400rwhp. Anything bigger would mean upgrading too much of the drive-train(i guess???) Best you can hope for cam only would be maybe 360rwhp probably a little less.
If you want it to be smooth and gentle at idle then a cam might not be for you.
Personally Id be tempted with a set of 1.85:1 roller rockers. Nice easy bolt on and you should gain maybe 15rwhp.
Cheap too. Pretty much a DIY job with one 8mm socket IIRC. That will make your cam 8% bigger.
If you do want something with a definite cam feeling then stay small in the LS1, something like a 220/224-114
But do you have headers already?
As already mentioned, once you start you might not be able to stop!
I also agree on the OTRCAI.
Tread slowly and carefully
Drive some other cars first before you decide.
We did headers and now are going 3.9 diff which i know will help the 1/4 mile 0-100 times but we want to be able to keep pulling like a train after that. We don't want to go forged internals and deffo don't want a SC so fell the cams the next best mod.
Maybe 400 rwhp's a bit ambitious but that's where we'd like to be
Col and i were just discussing it earlier and we both agree(for once) that we'll stay NA on the Monaro but definitely go SC'd on the R8. Don't know why but its just what we've decided
God dont i go on
Sorry ETA Edited to add as for the OTRCAI and maffless tune, i really wouldn't know where to start. I only just worked out how to post pictures
Edited by Bonnie and Clyde on Monday 24th August 22:28
ringram said:
Mel you know you have to start with what rwhp you want and work back from there!
Best you can hope for cam only would be maybe 360rwhp probably a little less.
If you want it to be smooth and gentle at idle then a cam might not be for you.
Personally Id be tempted with a set of 1.85:1 roller rockers. Nice easy bolt on and you should gain maybe 15rwhp.
Cheap too. Pretty much a DIY job with one 8mm socket IIRC. That will make your cam 8% bigger.
If you do want something with a definate cam feeling then stay small in the LS1, something like a 220/224-114
But do you have headers already?
As already mentioned, once you start you might not be able to stop!
I also agree on the OTRCAI.
Tread slowly and carefully
Drive some other cars first before you decide.
Would my stock LS2 cam give any worthwhile gains Rich. That's for beer money.Best you can hope for cam only would be maybe 360rwhp probably a little less.
If you want it to be smooth and gentle at idle then a cam might not be for you.
Personally Id be tempted with a set of 1.85:1 roller rockers. Nice easy bolt on and you should gain maybe 15rwhp.
Cheap too. Pretty much a DIY job with one 8mm socket IIRC. That will make your cam 8% bigger.
If you do want something with a definate cam feeling then stay small in the LS1, something like a 220/224-114
But do you have headers already?
As already mentioned, once you start you might not be able to stop!
I also agree on the OTRCAI.
Tread slowly and carefully

Drive some other cars first before you decide.
If you want 400rwhp then you need to look at something like a head and cam kit.
Thats like 35%+ more than stock, so you will need some serious stuff on an LS1.
Like heads, cam and intake. Its doable for sure, but you need to hit it seriously as cam only wont cut it unless you just put a silly cam in.
Which you wont like.
Best I did with my 220/224 and Dart 205 heads was 386rwhp. With a 224/228 cam and better heads 400rwhp would be easy. Actually its probably doable with the smaller cam and stuff like better heads and an underdrive pulley etc.
But thats going to cost you a fair bit. You could get a the number you want with a large cam at the expense of low end around town driving.
Maybe someone crazy like Gareth (sorry mate) wont care about that but I suspect you might not like it so much.
Heads are like $2000US plus all the other odds and sods etc. Gareth's LS2 cam would be a little better than what you have, but maybe by not too much.
Sounds like you need a 382 stroker and Gareths old LS2 heads!
Actually maybe you should talk to Gareth anyway as his LS2 heads and the 224/228 cam might get you close to 400rwhp at a good price point. In fact thats a good idea. See if someone has some old LS2 heads spare. I know Stevie had some ported heads available. Proper CNC ported heads will give you more power, but it depends on how much you want to spend too.
Thats like 35%+ more than stock, so you will need some serious stuff on an LS1.
Like heads, cam and intake. Its doable for sure, but you need to hit it seriously as cam only wont cut it unless you just put a silly cam in.
Which you wont like.
Best I did with my 220/224 and Dart 205 heads was 386rwhp. With a 224/228 cam and better heads 400rwhp would be easy. Actually its probably doable with the smaller cam and stuff like better heads and an underdrive pulley etc.
But thats going to cost you a fair bit. You could get a the number you want with a large cam at the expense of low end around town driving.
Maybe someone crazy like Gareth (sorry mate) wont care about that but I suspect you might not like it so much.
Heads are like $2000US plus all the other odds and sods etc. Gareth's LS2 cam would be a little better than what you have, but maybe by not too much.
Sounds like you need a 382 stroker and Gareths old LS2 heads!

Actually maybe you should talk to Gareth anyway as his LS2 heads and the 224/228 cam might get you close to 400rwhp at a good price point. In fact thats a good idea. See if someone has some old LS2 heads spare. I know Stevie had some ported heads available. Proper CNC ported heads will give you more power, but it depends on how much you want to spend too.
MyM8V8 said:
If you really want a cam for extra performance and good fuel economy to boot, you could do worse than a 220/220. They have had great success in Aus with these, and of course OTRCAI and mafless tune.
Yes but dont you have to keep doing the mafless tune yourself. I have no idea how this stuff works. How would an OTRCAI help. What does it do??Bonnie and Clyde said:
MyM8V8 said:
If you really want a cam for extra performance and good fuel economy to boot, you could do worse than a 220/220. They have had great success in Aus with these, and of course OTRCAI and mafless tune.
Yes but dont you have to keep doing the mafless tune yourself. I have no idea how this stuff works. How would an OTRCAI help. What does it do??ringram said:
Best you can hope for cam only would be maybe 360rwhp probably a little less.
She has 340 already Rich.And yes, I will have a lot of stuff for sale later in the year probably a whole LS2 or near enough. Headers spoken for already.
Edited by MyM8V8 on Monday 24th August 23:11
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


