Could anyone lend me......

[matt-man]

Hi all,

Following on from my problem page (thanks all for your input) does anyone have a flapper airflow meter they could lend me for a test?

Also, a spare ECU anyone?

400se...

Cheers guys!

[rev-erend]

http://www.pistonheads.co.uk/gassing/topic.asp?h=0...

[adam quantrill]

I have both together as a pair but bear in mind that I identified an intermittent fault on the ECU where it would occasionally overfuel, however if this isn't your problem then it's worth a try.

[matt-man]

Nice one guys - REV - havent seen that page before, very useful!

Adam - my problem is intermitant rough running so i hope it could be simply fixed!

Someone mentioned a stepper motor but i cant find one! Where is it??

[adam quantrill]

Not if you have a flapper - it'll be in the hotwire wedge parked next to you!

[rev-erend]

NP - might be worth checking if Leighs ECU is free from faults.

[matt-man]

adam quantrill said:

Not if you have a flapper - it'll be in the hotwire wedge parked next to you!

Thats why i was looking and looking but found nothing then?!!

Ill PM leigh, see what he has!

[Jack Valiant]

I used Leigh's ECU as a tester and was fine for my flapper 350i and proved my diagnosis of a dodgy ecu on my car!

Chris

[Trickie Dickie]

I had an intermittant problem on my 350 with rough running
Used Taffo's ECU and ran fine so a very kindly fellow Wedger
then checked and resoldered all the joints and cured the problem totally

HTH

Richard