Wing mirror search
Discussion
FormulaRed said:
Basically all I need is the internal metal frame.
like this ? http://www.tvrshop.com/search-subsection-detail.as...ETA
or £7 on http://www.thegriffithpages.com/index.php?option=c...
Edited by Del 203 on Saturday 12th September 15:35
If you can access the TVR Car Club forums then this thread may help you repair your mirror... http://www.tvr-car-club.co.uk/forum/forum_posts.as...
FormulaRed said:
Thanks for trying, I'm afraid that this is the base unit again and I need the next bit along that's within the mirror unit. The web site is useful though thanks and has shown me that I will probably have to buy a whole mirror unless someone has an old one they want to get rid of.
If I remember correctly they ain't bloody cheap 
a new mirror/bracket was north of £100 unpainted.
You will need to buy the whole mirror. Same happened to me and I couldnt buy the parts anywhere. Probably worth a quick call to tyrcarparts (and the other major suppliers). Last time I spoke with them they had a box of odds and sods in the office including bits of wing mirror. You might strike it lucky and find they have just the part you need in exchange for a small quantity of beer tokens.
Try brodie engineering (citroen fanciers). They stock them I think - though they werent answering the phone when I was replacing mine - and I bet they are cheaper than TVR stockists.
Does your griff have the mirror-mounted door switch to open the doors ? (do any griffs? - i'm not sure)
If so, be aware most of the new mirrors you would can buy (all the ones I saw) require you to drill the hole in them yourself to take the door switch. If doing it make sure you get the hole lined up in the right place so switch doesnt foul the internal) and rewire with your old connectors (my 99 chim had different connections to the standard).
If not I'll scuttle off back to the Chim forum....
Does your griff have the mirror-mounted door switch to open the doors ? (do any griffs? - i'm not sure)
If so, be aware most of the new mirrors you would can buy (all the ones I saw) require you to drill the hole in them yourself to take the door switch. If doing it make sure you get the hole lined up in the right place so switch doesnt foul the internal) and rewire with your old connectors (my 99 chim had different connections to the standard).
If not I'll scuttle off back to the Chim forum....
Dunno if this lot do internals, but the complete mirror seems cheaper.
http://cx-basis.de/eshop/product_info.php?cPath=54...
Edit... And Ian here has 2nd hand ones advertised.
http://www.itstvr.com/_sgg/m4m2s8_1.htm
http://cx-basis.de/eshop/product_info.php?cPath=54...
Edit... And Ian here has 2nd hand ones advertised.
http://www.itstvr.com/_sgg/m4m2s8_1.htm
Edited by 5.0ltr on Tuesday 15th September 09:35
Gassing Station | Griffith | Top of Page | What's New | My Stuff





