Anyone going to this Saturday?

[Transmitter Man]

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

Phil
420 SEAC

[gsx600]

Just down the road from me here

Big CC Racing,
Fishponds Road,
Wokingham
Berkshire
RG41 2QL

So may well try and attend in the badly running Wedge

Sounds like some tasty machinary will be there

Edited by gsx600 on Friday 18th September 14:04

[rev-erend]

I'd like to but really need to get on with the project..sorry.

[gsx600]

Some nice cars and bikes there - will put piccies up later

Had a miserable run with 185 hp at rear wheels

Down from 211 hp 3 years ago

So gotta get a move on with my ecu fitting

Nice guys there and looks like a good local site for me to tune the new ecu eventually

[gsx600]

Some pictures here

http://www.facebook.com/album.php?aid=2036677&...

[Transmitter Man]

Paul,

Was that your 450 on the rollers in one of your photo's?

BHP?

I decided not to go so as to get my car clean for a classic car show today.

Maybe next time.

Phil
420 SEAC

[gsx600]

Yep that was mine , bhp a little disappointing down to 184 from 211 at wheels with torque up to 215 from 211 from 3 years ago

Had a very strange torque graph this year with 200 ft/lb kicking in at 2100 rpm and a very slight curve all the way to 214 ft/lb at 4000 rpm

From what I remember the only tweeks in the car is back to a rising rate regulator and turning the base fuel psi to 45 psi to sort out a bad idle

Even my AFR was @ correct from 2100 rpm to 4600 running between 12 - 14, maybe running slightly lean to get maximum power