Clear indicator lights for S4 and later modells.
Discussion
Hi !
I have been searching everywere for clear indicator lenses for my Esprit S4, but i cant find any anywere.
So now i have been in contact with a company here in sweden who can make them for me but they demand that i order at least 10 sets.
The production will start in february or march.
The price will be between 80 and 130 Euro for 2 indicator lenses, depending on how many i order.
So now im checking here if any one is interested in a set of indicator lenses ?!
E-mail me if you are interested: m6_power@hotmail.com
I have been searching everywere for clear indicator lenses for my Esprit S4, but i cant find any anywere.
So now i have been in contact with a company here in sweden who can make them for me but they demand that i order at least 10 sets.
The production will start in february or march.
The price will be between 80 and 130 Euro for 2 indicator lenses, depending on how many i order.
So now im checking here if any one is interested in a set of indicator lenses ?!
E-mail me if you are interested: m6_power@hotmail.com
If you are a little handy with a jigsaw then don't bother wasting your money.
Make some using the flat transulcent sheets from a suspended ceiling. Really easy to make. I've made some for my Nissan. Look just as good as buying a set and it will only cost you a couple of pounds/ dollars and an hour or two of your time.
use your old lenses as a pattern. Tip set the jigsaw to a low speed as is will melt the plastic. Better still to make the basic shape i.e a rectangle use a craft knife and score the plastic a few times then fold and it break like a tile.
Hope this helps.
Make some using the flat transulcent sheets from a suspended ceiling. Really easy to make. I've made some for my Nissan. Look just as good as buying a set and it will only cost you a couple of pounds/ dollars and an hour or two of your time.
use your old lenses as a pattern. Tip set the jigsaw to a low speed as is will melt the plastic. Better still to make the basic shape i.e a rectangle use a craft knife and score the plastic a few times then fold and it break like a tile.
Hope this helps.
The little ones on the side of the car (repeaters i think there called?) are the same as Renault 5/9/11 and are available from many accessory shops in clear or smoked/coloured plastic.
The front indicator (also housing the side lights) can be done as Dave says using an appropriate piece of plastic and a saw (justin made me a set and dermot also has some he did) but i found that mine cracked after some hard stone impacts so i've put the originals back on. They lasted about 2 years or so.. If you're getting fronts made up in the exact shape of the originals from proper impact resistant plastics then i might be interested - price seems a bit steep though!
cheers
Rob
edited 'cos i can't spell!
>> Edited by rob.e on Friday 9th January 13:19
The front indicator (also housing the side lights) can be done as Dave says using an appropriate piece of plastic and a saw (justin made me a set and dermot also has some he did) but i found that mine cracked after some hard stone impacts so i've put the originals back on. They lasted about 2 years or so.. If you're getting fronts made up in the exact shape of the originals from proper impact resistant plastics then i might be interested - price seems a bit steep though!
cheers
Rob
edited 'cos i can't spell!
>> Edited by rob.e on Friday 9th January 13:19
Gassing Station | Esprit | Top of Page | What's New | My Stuff