oil pressure with LS7 engine ?
oil pressure with LS7 engine ?
Author
Discussion

spatz

Original Poster:

1,783 posts

215 months

Friday 25th September 2009
quotequote all
hi folks,

what is the oil pressure with you ls7 engines ?
I had some leaks during my first hard drive with approx 9 bar which seems too high, now that i lost apporx 1 liter through the leaks i am reading 4-7 bars.

thanks

ultimaCZ

260 posts

284 months

Friday 25th September 2009
quotequote all
2-5 bars, when hot

MHunter

125 posts

220 months

Friday 25th September 2009
quotequote all
My SBC idles at 4.5 bars.

San Diego GTR

469 posts

236 months

Saturday 26th September 2009
quotequote all
Right at 5 Bars until its been on for an hour or so then it drops to about 4 to 4.5 Bars. I've been told that is "normal" for an LS7.

Paul

spatz

Original Poster:

1,783 posts

215 months

Saturday 26th September 2009
quotequote all
obviously the dailey engineering pump that the french racing company has fitted is providing higher oil pressure, varies between 2,5 and 7 bar now. still fighting some leaks on the pressurized oil side.....

Gulf -LS2

1,922 posts

233 months

Saturday 26th September 2009
quotequote all
Im sure you should be looking at around 60 psi (4 bar ish) max, the ali block if standard wont handle a lot more.

Edited by Gulf -LS2 on Sunday 27th September 10:36

spatz

Original Poster:

1,783 posts

215 months

Sunday 27th September 2009
quotequote all
thanks kyle,

have now succesfully tightened my AN fittings up so have no oil leaks any longer. Still the oil pressure
varies from 2,5 idling to a max of 8 bars. Have contacted my engine supplier if this is the correct value,
could be as well that my readings are wrong. Looking at the leaks and how they sprayed in the engine bay,
there must be some high pressure in the system.