I need a manufacturer!
I need a manufacturer!
Author
Discussion

jimmyb

Original Poster:

12,254 posts

247 months

Friday 2nd October 2009
quotequote all
Hi

Is anybody here in manufacturing. I need a company who could make a metal cased led torch from start to finish. Anybody either in that field or have any recommendations?


Thanks

J

CHIEF

2,270 posts

313 months

Friday 2nd October 2009
quotequote all
How many do you need to buy? i.e. 1000+ does it lend itself to goinng to the far east?

jimmyb

Original Poster:

12,254 posts

247 months

Friday 2nd October 2009
quotequote all
CHIEF said:
How many do you need to buy? i.e. 1000+ does it lend itself to goinng to the far east?
Its a little project i am working on so at the mo not sure really will also be cost dependant so not sure how many will be required initially.Will if correct though be a global market device as its not merely a torch. So at the moment am trying to get dimensions right as have settled on final design just need a few prototypes made first before the next step though.
Undecided whether to apply for patent first or to get a company to make up some prototypes before patent application which is a HUGE risk in my book due to the fact they may try "steal" the product but will give me a better product dimension description for patent.

Any thoughts on which way to go with this? Any idea who i could go to to get some prototypes made up?

therealpigdog

2,592 posts

228 months

Friday 2nd October 2009
quotequote all
Do you need one designing and manufacturing, manufacturing from your design, or just manufacturing from an existing design?

Can't help I'm afraid, but some more details might help those who can.

jimmyb

Original Poster:

12,254 posts

247 months

Friday 2nd October 2009
quotequote all
therealpigdog said:
Do you need one designing and manufacturing, manufacturing from your design, or just manufacturing from an existing design?

Can't help I'm afraid, but some more details might help those who can.
Ive pretty much settled on my design so really it will be minor fine tuning in terms of dimensions there is a final issue on how to deal with the battery to led power but other than that thats it really just a matter of getting a couple made.

Engineer1

10,486 posts

240 months

Friday 2nd October 2009
quotequote all
For Prototypes look into rapid prototyping, will get you samples that you can work with as altering dimensions on a metal casting potentially involves tooling changes and stupid cost.

jimmyb

Original Poster:

12,254 posts

247 months

Friday 2nd October 2009
quotequote all
Engineer1 said:
For Prototypes look into rapid prototyping, will get you samples that you can work with as altering dimensions on a metal casting potentially involves tooling changes and stupid cost.
Ok how do i go about that any recommendations etc??

cazzer

8,883 posts

279 months

Friday 2nd October 2009
quotequote all
Have you got drawings of it etc?
I'm twiddling my thumbs at home at the moment.
If you have drawings I don't mind making a 3d prototype of it.
I have a mate who works at a uni so I can get it made on the rapid prototyper for the cost of material.

jimmyb

Original Poster:

12,254 posts

247 months

Friday 2nd October 2009
quotequote all
cazzer said:
Have you got drawings of it etc?
I'm twiddling my thumbs at home at the moment.
If you have drawings I don't mind making a 3d prototype of it.
I have a mate who works at a uni so I can get it made on the rapid prototyper for the cost of material.
Cazzer thanks for the offer. In retrospect i think that may be a good idea actually as whilst its not patented i can still get the fundamentals done without giving the game away as to its true purpose. Ill knock up some mock drawings in the next couple days and send it to you if thats ok??

Are we talking charidee, beer tokens or kidneys??

cazzer

8,883 posts

279 months

Friday 2nd October 2009
quotequote all
50% equity will do smile

I'm bored mate. Job seeking.

I'll do it for the fun of it.
But if you want it prototyped you'll need to pay for the materials. (So try to minimise the amount of solid lumps of plastic)

jimmyb

Original Poster:

12,254 posts

247 months

Friday 2nd October 2009
quotequote all
cazzer said:
50% equity will do smile

I'm bored mate. Job seeking.

I'll do it for the fun of it.
But if you want it prototyped you'll need to pay for the materials. (So try to minimise the amount of solid lumps of plastic)
No probs paying for the materials. There will only be one or two lumps of plastic. Also needs to be fairly solid as final is metal and although it has only 3 or so moving parts they are non flex requiring as in their final metal form.

cazzer

8,883 posts

279 months

Friday 2nd October 2009
quotequote all
When you get it prototyped it will be ABS plastic so its pretty solid.
But the charge is based on material volume. So a hollow case with ribs for support will be a lot cheaper than a solid lump of ABS.

jimmyb

Original Poster:

12,254 posts

247 months

Friday 2nd October 2009
quotequote all
cazzer said:
When you get it prototyped it will be ABS plastic so its pretty solid.
But the charge is based on material volume. So a hollow case with ribs for support will be a lot cheaper than a solid lump of ABS.
Oh well thats good as its a hollow case! biggrin

klimakool

592 posts

206 months

Friday 2nd October 2009
quotequote all
jimmyb said:
CHIEF said:
How many do you need to buy? i.e. 1000+ does it lend itself to goinng to the far east?
Its a little project i am working on so at the mo not sure really will also be cost dependant so not sure how many will be required initially.Will if correct though be a global market device as its not merely a torch. So at the moment am trying to get dimensions right as have settled on final design just need a few prototypes made first before the next step though.
Undecided whether to apply for patent first or to get a company to make up some prototypes before patent application which is a HUGE risk in my book due to the fact they may try "steal" the product but will give me a better product dimension description for patent.

Any thoughts on which way to go with this? Any idea who i could go to to get some prototypes made up?
patent, design and intellectual rights before you do anything, saw a few ideas not stolen by the prototypers but by a staff member leaving. protect your desighn and all thoughts on it first

cazzer

8,883 posts

279 months

Friday 2nd October 2009
quotequote all
jimmyb said:
cazzer said:
When you get it prototyped it will be ABS plastic so its pretty solid.
But the charge is based on material volume. So a hollow case with ribs for support will be a lot cheaper than a solid lump of ABS.
Oh well thats good as its a hollow case! biggrin
send me the drawings to my username at tintanet.com

going to eat now smile

jimmyb

Original Poster:

12,254 posts

247 months

Friday 2nd October 2009
quotequote all
klimakool said:
jimmyb said:
CHIEF said:
How many do you need to buy? i.e. 1000+ does it lend itself to goinng to the far east?
Its a little project i am working on so at the mo not sure really will also be cost dependant so not sure how many will be required initially.Will if correct though be a global market device as its not merely a torch. So at the moment am trying to get dimensions right as have settled on final design just need a few prototypes made first before the next step though.
Undecided whether to apply for patent first or to get a company to make up some prototypes before patent application which is a HUGE risk in my book due to the fact they may try "steal" the product but will give me a better product dimension description for patent.

Any thoughts on which way to go with this? Any idea who i could go to to get some prototypes made up?
patent, design and intellectual rights before you do anything, saw a few ideas not stolen by the prototypers but by a staff member leaving. protect your desighn and all thoughts on it first
What i will be sending to them will give them no clue as to the torches final design. In fact it will confuse the poo out of em. But i will be putting it all in writing and getting a patent search and application done etc as well

DonnyMac

3,634 posts

234 months

Friday 2nd October 2009
quotequote all
jimmyb said:
cazzer said:
50% equity will do smile

I'm bored mate. Job seeking.

I'll do it for the fun of it.
But if you want it prototyped you'll need to pay for the materials. (So try to minimise the amount of solid lumps of plastic)
No probs paying for the materials. There will only be one or two lumps of plastic. Also needs to be fairly solid as final is metal and although it has only 3 or so moving parts they are non flex requiring as in their final metal form.
Please tell me it's a Laaazzzzer! wink

jimmyb

Original Poster:

12,254 posts

247 months

Friday 2nd October 2009
quotequote all
Its and led torch how on earth could it be a lazzzzzzzer?????

biggrin

DonnyMac

3,634 posts

234 months

Friday 2nd October 2009
quotequote all
jimmyb said:
Its and led torch how on earth could it be a lazzzzzzzer?????

biggrin
Earlier in the week, ref http://www.pistonheads.co.uk/gassing/topic.asp?h=0...


jimmyb

Original Poster:

12,254 posts

247 months

Friday 2nd October 2009
quotequote all
Saw that thread and made the connection but was unaware you were aware of it. smile