T350 bonnet removal

[Nigeyboy]

I am looking to remove the bonnet to get better access to the engine bay this winter, but was wondering what is the best way to undo the bolts. There appears to be three options:

1) 2 x bolts from bracket into the bonnet
2) 2 x bolts from bachet into hinge (think this may be best)
3) 1 large bolt holding hinge to inner wing

Does anyone know the correct way to remove? Thanks

[SP6 Animal]

I have removed the bonnet many times.
You need 2 of you 1 to hold bonnet and 1 to remove bolts.
I removed the 4 bolts that go into the bonnet and unclipped the stay.
Very easy.

When replacing bonnet i nipped up 4 bolts loosly and closed the lid you can then realign it better before finaly tightening the bolts.